Important information

Modules with Electrostatic-Sensitive Devices

Modules with electrostatic-sensitive devices are identified by the following sticker:

Figure 1: ESD label

When you handle components fitted with ESDs, you must always observe the following points:

Switch off the system and remove the power plugs from the power outlets before installing or removing components with ESDs.

You must always discharge static build-up (e.g. by touching a grounded object) before working with such components.

Any devices or tools that are used must be free of electrostatic charge.

Wear a suitable grounding cable that connects you to the external chassis of the system unit.

Always hold components with ESDs at the edges or at the points marked green (touch points).

Do not touch any connectors or conduction paths on an ESD.

Place all the components on a pad which is free of electrostatic charge.

IFor a detailed description of how to handle ESD components, see the relevant European or international standards (EN 61340-5-1, ANSI/ESD S20.20).

38

Operating Manual

TX200 S6

Page 38
Image 38
Fujitsu TX200 S6 manual ESD label