Starting up and operation
Hard disk drive indicators
1 | 2 | 1 | 2 |
Figure 16: Indicators on the 3.5 inch and 2.5 inch HDD modules
1HDD BUSY (green)
–Lit: HDD in active phase (drive active, drive being accessed)
–Does not light: HDD inactive
2HDD FAULT (orange)
(in conjunction with a RAID controller)
● SAS server variant
–Does not light: no HDD error
–Lit: HDD Faulty (drive defective/needs replacing, drive failed, drive deactivated by software or the HDD module is not correctly inserted)
–Slow flashing: HDD Rebuild (the data is being restored after changing a drive)
–Fast flashing: HDD Identify
●SATA server variant
–Does not light: no HDD error
–Lit: HDD Faulty or Rebuild Stopped (drive defective and must be replaced, a rebuild process was stopped or the module is not correctly inserted)
–Slow flashing: HDD Rebuild (the data is being restored after changing a drive)
–Fast flashing: HDD Identify
72 | Operating Manual | TX200 S6 |
