Preface

Hard disk drives

The server is shipped with one of the following drive cages:

For up to four 3.5-inch SAS/SATA hard disk drives:

Up to four SAS/SATA HDD modules can be used in the drive cage. Each HDD module can accommodate a SAS/SATA hard disk drive with a maximum height of 1 inch. The module is connected to the SAS/SATA backplane wirelessly. This allows HDD modules to be plugged in and pulled out easily.

As an option, a hard disk extension box (with a maximum of two SAS/SATA HDD modules) can be installed (see section "Accessible drives" on page 18).

IUp to four SATA hard disk drives are controlled by the onboard SATA controller. An additional SAS/SATA RAIDcontroller must be installed to control additional SATA hard disk drives or SAS hard disk drives.

For up to eight 2.5-inch SAS/SATA hard disk drives:

Up to eight SAS/SATA HDD modules can be used in the drive cage. Each HDD module can accommodate an SAS/SATA hard disk drive with a 2.5- inch format. The modules are connected to the SAS/SATA backplane wirelessly. This allows HDD modules to be plugged in or pulled out easily.

As an option, a hard disk extension box (with a maximum of eight SAS/SATA HDD modules) can also be installed (see section "Accessible drives" on page 18).

IUp to eight SAS/SATA hard disk drives are controlled by the SAS/SATA RAID controller already installed.The hard disk extension box for 2.5-inch SAS hard disk drives requires an additional SAS/SATA RAID controller.

If the server has the corresponding RAID configuration, HDD modules can also be replaced during operation.

16

Operating Manual

TX200 S6

Page 16
Image 16
Fujitsu TX200 S6 manual Preface Hard disk drives, For up to eight 2.5-inch SAS/SATA hard disk drives