Manuals / Fujitsu / Computer Equipment / Server

Fujitsu TX200 S6 manual Reinstalling the fans and closing the server, Installing system fan 1

Models: TX200 S6

1 126

Download 126 pages 61.66 Kb

Page 112

CSS components

8.2.5Reinstalling the fans and closing the server

8.2.5.1Installing system fan 1 (and 3)

Figure 36: Installing system fan 1 (and 3)

ÊPlace the hooks of system fan 1 (and 3) into the recesses on the rear of the server (1).

ÊPush system fan 1 (and 3) in the direction of the arrow until the locking lever engages (2).

ÊConnect the fan cable to the connector FAN1 (if there is a second fan cable, connect this in FAN3) on the system board (see the technical manual for the system board D2799).

112

Operating Manual

TX200 S6

Image 112

Fujitsu TX200 S6 manual Reinstalling the fans and closing the server, Installing system fan 1

Contents

Primergy TX200 S6 Server Copyright and Trademarks Comments… Suggestions… Corrections…Certified documentation according to DIN EN ISO For your safety High safety useRadio interference Aluminum electrolytic capacitorsHarmonic Current Standards Measures against momentary voltage dropOnly for the Japanese market About Sata hard disk drives Only for the Japanese market Operating Manual Contents Contents Control elements and indicatorsScreen remains blank Appendix server specification 115 Index 121 Preface Documentation overview Concept and target groups for this manualPreface Preface Further sources of information Features Customer Self Service CSSTrusted Platform Module TPM Preface System boardSlots for expansion cards Preface Hard disk drives For up to eight 2.5-inch SAS/SATA hard disk drivesPreface Onboard Sata controller SAS/SATA RAID controllerAccessible drives Preface Power supply CoolingPreface High level of availability and data security Preface IRMC S2 with integrated management LAN connector Preface Server management Preface ServerView Installation Manager Service and supportPreface ServerView Remote Management Notational conventions Electrical data Technical dataCompliance with regulations and standards Preface Mechanical specifications Floorstand Rack WeightMaintenance area for the floorstand model Ventilation clearanceTX200 S6 Installation steps, overview Installation steps, overview Safety instructions Important informationInstallation and operation Important information Before starting upImportant information Important information Batteries TX200 S6 Laser information Never remove parts of the optical drive casingESD label Energy Star Important information Other important informationCE conformity FCC Class a Compliance StatementTransporting the server For the Japanese market, please refer to 安全上の注意およびその他の重要情報 Environmental protection Environmentally-friendly product design and developmentEnergy-saving information Packaging informationLabels on plastic casing parts Returns, recycling and disposalMinimum acclimatization time Hardware installationHours Hardware installation Unpacking the serverSetting up the floorstand model VcautionMounting the anti-tilt bracket Mounting the anti-tilt bracketRack system requirements Installing/removing the rack modelFujitsu rack systems For 19-inch standard rack for the Japanese market 3rd party racksMechanical requirements TX200 S6 Hardware installation Hardware installation Fitting the support bracket Fitting the support bracketHardware installation Installing the support systems Insert the server see Inserting the server on Hardware installation Inserting the server Inserting the server aInstallation in 3rd party racks Racks with installation depth of 735 mm Racks with installation depth smaller/greater than 735 mmConnecting devices to the server Connector panel on the rear sideConnecting the server to the mains Hardware installation Connecting the monitorConnecting the server to the mains Using cable ties Using cable tiesConnecting cables Disconnecting cablesHardware installation Access to the accessible drives Access to the drives floorstand modelStarting up and operation Starting up and operation Removing the drive cover from the hard disk drive coverAccess to the HDD modules Removing the hard disk coverControl elements and indicators Front of serverStarting up and operation ID card Control elementsStarting up and operation LEDs on the control panel Indicators on the drives DVD drive activity indicator Starting up and operation Hard disk drive indicators Indicators on the 3.5 inch and 2.5 inch HDD modulesRear of server Starting up and operation Starting up and operation LAN indicators LAN activity indicator management LANLAN transfer rate indicator management LAN LAN activity indicator shared LANIndicators on the hot-plug power supply units Switching the server on and off Switching the server onSystem already installed Switching the server offTimer-controlled switch-on/off Ring indicatorAfter power failure Power button overrideConfiguring the onboard Sata controller Configuring the serverConfiguring the SAS/SATA RAID controller Advantages of the ServerView Installation Manager LSI RAID / Scsi ControllersConfigure onboard Sata controller Installing the operating systemCleaning the server Bios Setup security functions Property and data protectionProperty and data protection Troubleshooting and tips Power-on indicator remains unlitPower cable incorrectly connected Power supply overloadedServer switches itself off Screen remains blankNo screen display or display drifts Flickering stripes on monitor screenMonitor does not support the set horizontal frequency RAID controller configuration incorrect Drives reported as dead when starting systemIncorrect date and time RAID controller is not configured for this drive Error message on screenAdded drive reported as defective Page CSS components Hot-plug power supply units optional Replacing the hot-plug power supply unitHot-plug components CSS componentsHot-plug hard disk drives CSS components For description see section Hard disk drive indicators on CSS components 2.1 3.5-inch HDD module and dummy moduleCSS components 2.2 2.5-inch HDD module and dummy module CSS components Handling hard disk drives and HDD modules CSS components Floorstand removing the hard disk cover CSS components Removing/installing the dummy module Unlocking the 3.5-inch and 2.5-inch HDD modules CSS components Installing the HDD module Installing the 3.5-inch and 2.5-inch HDD modulesCSS components Removing the HDD module Non-hot-plug components Open the server see section Opening the server onOpening the server Opening the server example floorstand modelCSS components Removing system fan 2 System fan 2 and system fan 2&4Removing system fan 1 System fan 1 and system fan 1&3Identifying a CSS component Example Removing system fan 1&3Replacing a memory module Installing a new memory moduleRemoving a defective memory module Replacing system fan 2 Replacing the system fanReplacing system fan 1 Replacing an expansion card Removing a defective expansion cardCSS components Installing a new expansion card Installing a new expansion cardReinstalling the fans and closing the server Installing system fan 1CSS components Installing system fan 2 Installing system fan 2CSS components Closing the server Closing the server example floorstand modelAppendix server specification Memory Modules ConfigurationProcessor InterfacesAppendix server specification Onboard or integrated controllersDrive bays PCI-SlotsOperating Panel Dimensions Base unit specific EnvironmentalElectrical values 120 Operating Manual Bios IndexIndex Labels LAN activity indicator Sddc Unpacking, server USB connector