CSS components
8.1.2.5Removing/installing the dummy module
Free slots are provided with dummy modules. Remove the dummy module before installing an additional HDD module.
1
1
2
Figure 24: Removing/installing the dummy module (example: 3.5-inch dummy module)
ÊPress both tabs on the dummy module together until the locking mechanism disengages (1).
ÊPull the dummy module out of the slot (2).
To install a dummy module, follow the same procedure in reverse order.
VCAUTION!
Keep the dummy module for future use. If you have removed a HDD module and do not install a new one in its place, put the dummy module back in its place for cooling, to comply with EMC regulations (regulations regarding electromagnetic compatibility), and for protection against fire. Ensure that the dummy module engages correctly in the bay.
TX200 S6 | Operating Manual | 99 |
