Starting up and operation
5.2.1.1ID card
You can pull out the ID card as far as it will go and push it back in again.
The ID card contains various system information, such as the product name, serial number, order number, MAC addresses and DNS name.
5.2.1.2Control elements
On/Off button
When the system is switched off, it can be switched on again by pressing the On/Off button.
When the system is operating, pressing the On/Off button will switch off the system.
VCAUTION!
Risk of loss of data!
IThe On/Off button does not disconnect the server from the mains voltage. To disconnect from the mains completely, remove the power plug(s).
NMI NMI button
VCAUTION!
Do not press! Risk of loss of data! The NMI button may only be used by service.
RST Reset button
Pressing the reset button reboots the system.
VCAUTION!
Risk of loss of data!
ID ID button
ID LED lights up (blue) on the front and on the rear of the server when the ID button is pressed. Both ID indicators are synchronized.
TX200 S6 | Operating Manual | 69 |
