Fujitsu TX200 S6 manual Appendix server specification, Onboard or integrated controllers

Appendix: server specification

Serial 2 (9-pin)	1 x serial RS-232-C, optional - occupies an unused
	slot
LAN / Ethernet (RJ-45)	1 x Gbit/s Ethernet
Service LAN (RJ45)	1 x dedicated service LAN connector for iRMC S2
	(10/100 Mbit/s) Service LAN traffic can be switched
	to shared onboard Gbit LAN port
Onboard or integrated controllers
RAID Controller	Modular RAID 0/1 controller with "Integrated
	Mirroring Enhanced" (SAS IME) for SAS1.0.
	RAID levels 0, 1 and 1E are supported for internal
	hard disk drive configurations. For the Japanese
	market only RAID level 1 is supported for internal
	hard disk drive configurations.
	Modular RAID 0/1 controller with “MegaRAID
	functionality” (SAS MegaRAID) for SAS1.0 and
	SAS2.0. RAID levels 0, 1,10 and 1E are supported
	for internal hard disk drive configurations.
	Modular RAID 5/6 controller with "MegaRAID
	functionality" (SAS MegaRAID) for SAS1.0 and
	SAS2.0. RAID levels 0, 1, 10, 1E, 5, 50, 6 and 60 are
	supported for internal hard disk drive configurations.
SATA Controller	ICH10R, 6-port SATA (4x for internal hard disks, 2x
	for accessible drives)
SATA Controller type	On board SATA controller supports RAID levels
notes	0,1,10
Remote Management	Integrated Remote Management Controller
Controller	(iRMC S2, 32 MB attached memory incl. graphics
	controller), IPMI 2.0 compatible
Trusted Platform	Infineon TCG V1.2 compliant (option)
Module (TPM)

116 Operating Manual TX200 S6