9
Two-Outlet Receptacle Installation
Monster In-Wall PowerCenters are available with either 15-amp or 20-amp outlet. Be sure to use the outlet that
matches your existing branch circuit.
A) Connect the output wires extending from the Surge Module to the two-outlet receptacle as follows:
1. Remove the three screws from the side of the two-outlet receptacle by turning
each counterclockwise until loose.
2. Align the ring terminal holes on the output wires with the screw holes.
3. Reinsert the three screws and turn each clockwise until fully tightened.
B) Attach the included gold-plated grounding plate and both the two-outlet receptacle and the Surge Module
to the two gang outlet box by tucking any excess wire away, aligning the holes between the gold-plated
grounding plate, the two units, and the two gang outlet box, inserting 4 included silver screws (2 each unit),
and turning each clockwise until secure.
Surge Module Two-Outlet
Receptacle
HOOK-UP GUIDE – STANDALONE APPLICATIONS