SOYO SY-6IEM quick start Install the Mainboard, Install the CPU

Hardware Installation

SY-6IEMQuick Start Guide

Install the Mainboard

Follow the steps below in order to perform the installation of your new SY-6IEMMainboard.

Step 1. Install the CPU

Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover or write your own combination in the space provided.

233MHz (66 x 3.5)	300MHz (66 x 4.5)	366MHz (66 x 5.5)
266MHz (66 x 4.0)	333MHz (66 x 5.0)	MHz ( x )

CPU Mount Procedure: To mount the Pentium® II processor that you have purchased separately, follow these instructions.

1 Unpack the Retention Kit 2 Position the Mainboard 3 Insert the Screws

Slot 1	4	Install the Supporting Base
Supporting Base
Support Clip
Latches (x2)
	Heat Sink
Screws (x2)

		Retention Clip	CPUFAN Power		ATX Power	Larger Pin-hole
5	Install the Retention Clip			6	Install the CPU

7

Install the Support Clip

8

Insert the Latches

9

Remember to connect the CPU Cooling Fan to the CPUFAN power connector on the mainboard.

6