SOYO SY-6IEM quick start Enable/Disable Onboard Sound JP2, Clear Cmos Data JP5

SY-6IEMQuick Start Guide

Step 6. Enable/Disable Onboard Sound (JP2)

The onboard audio features of your mainboard are controlled by jumper JP2.You can choose to enable or disable the available sound function by setting JP2 accordingly.

•Short pin 2-3 on jumper JP2 to enable the onboard sound function. Then, you can plug your external audio devices such as amplified-speakers, CD-player, and microphone to the mainboard Line-out, Line-in and Mic ports right after the mainboard is installed. (You do not need to install any sound card.)

•To disable the onboard sound options short pin 1-2 on jumper JP2.

Onboard Sound	Enable		Disable
	Short pin 2-3 to		Short pin 1-2 to
JP2 Setting	enable the onboard		disable the onboard
	sound function.	1 2 3	sound function.	1 2 3

Step 7. Clear CMOS Data (JP5)

Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5 for at least 5 seconds, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap.

CMOS Clearing	Retain CMOS Data		Clear CMOS Data
	Short pin 1-2 to retain	3	Short pin 2-3 for	3
JP5 Setting		2		2
			at least 5 seconds
	the new settings.
		1	to clear the CMOS.	1

Note: You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation.

Hardware Installation

9