Philips BDL4230ET user manual Inserting the Batteries in the Remote Control

User Manual BDL4230ET

2.4.2.INSERTING THE BATTERIES IN THE REMOTE CONTROL

1.Remove the cover on the rear of the remote control.

2.Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are correctly aligned.

3.Replace the cover.

Note: Do not mix battery types, e.g. alkaline and manganese.

2.4.3.OPERATING RANGE OF THE REMOTE CONTROL

When pressing a remote control button, point the top of the remote control towards the remote control sensor.

Use the remote control within a distance of about 10m/32ft from the display's remote control sensor and within a horizontal and vertical angle of 45 degrees.

Note: The remote control may not function properly if the remote control sensor on the display is under direct sunlight, in a location with strong illumination, or if there is an obstacle in the path of signal transmission.

RETURN TO THE CONTENTS