Philips BDL4230ET user manual PIP Size, Large Middle Small PIP Audio, PIP Reset

User Manual BDL4230ET

5.2.4.PIP MENU

Notes:

• For COMPONENT, VGA, DVI-D and HDMI inputs only.

• For FULL and NORMAL zoom modes only.

•The PIP function is turned off by default. Press the PIP ON/OFF button on the remote control to turn on PIP and make it accessible from the OSD menu.

•When TOUCH FEATURE is turned on, the PIP function will be disabled. Items under the PIP menu will also become unavailable.

PIP	SMALL
PIP SIZE
PIP AUDIO	MAIN
PIP RESET

Sel Adjust Enter Back Quit

PIP SIZE

Select the size of the sub picture in the PIP (Picture-in-Picture) mode.

Use the PLUS/MINUS button to toggle between

• LARGE	• MIDDLE
• SMALL

PIP AUDIO

Select the audio source in the PIP (Picture-in-Picture) mode.

Use the PLUS/MINUS button to toggle between

•MAIN - Select audio from the main picture

•PIP - Select audio from the sub picture.

PIP RESET

Reset all settings in the PIP menu.

Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Select YES and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu.

Notes:

• The PIP function is only available under certain signal source combinations as shown in the table below.

				Main picture signal source
		VIDEO	S-VIDEO	COMPONENT	VGA	DVI-D	HDMI
	VIDEO
Sub	S-VIDEO
picture	COMPONENT
signal
	VGA
source
	DVI-D
	HDMI
( : PIP function available, : PIP function unavailable)
• The availability of the PIP function will also depend on the resolution of the input signal being used.

RETURN TO THE CONTENTS