Metz MF 72TL68, MF 82TL95 manual Operation without the remote control unit, + F

– + F

27.Operation without the remote control unit

The following procedures are intended only for cases where the batteries of the remote control unit are exhausted or the remote control unit is not available.

The TV controls are located at the front of the set underneath a cover which can be opend with the fingernails.

Switching on

Press the main switch on the TV set to switch to standby mode. To switch the set on with program- me position 1 selected, press and hold the key F until the green LED lights up.

You can also execute the following functions with the controls on the front of the TV set. The prese- lected function remains active for 10 seconds.

Changing programme positions:

Press the -/+ keys.

Volume:

Press the preselection key F until the bar display for volume appears on the screen. Then press the

-or + key to adjust the volume.

Contrast:

Press the preselection key F until the bar display for contrast appears on the screen. Then press the

-or + key to adjust the contrast.

50