Call the menu
MENU
OK
11.1 Picture settings for a specific
programme position ...
☞In a menu with two asterisks (**), the pictu- re settings for a specific programme posi- tion cannot be changed.
If the standard settings are not satisfactory for cer- tain programme positions, you can define diffe- rent settings for these positions with the menu item „Picture settings for Pr ...“. These settings apply only to the selected programme position and can- not be overwritten by the standard settings.
TV-Menü
AV devices
Station table
Timer 
Configuration
: select, OK: go to settings.
VCR
Colour standard
Colour offset
CTI
Comb filter
Sound set.prog.po Noice reduction
Sound settings, gen. Picture sharpness Pict. set.,prog. posn.* Colour intensity Pict. settings, gen. Contrast
These settings apply to the currently selected programme position.
Defining different picture settings for Pr. xy:
•Select the programme position for which you want to define different pic- ture settings.
•Press the „MENU“ key to open the TV menu.
•Press the „OK“ key to open the menu „Picture and sound“.
•Use the cursor control key to select the
OK
OK
*The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu.
item „Picture settings for Pr. xy“.
•Press the „OK“ key and then select the setting you want to change.
•Press the „OK“ key to confirm your selection and then, in the setting window, use the - + key to change the setting.
•Press the „OK“ key to save the new setting.
•Press the „TV“ key to close the menu.
☞You can also define and recall the individu- al picture settings in the station table.
2)Available only on TV sets which are equipped with this option.
20
