Metz MF 72TL68, MF 82TL95 manual Executing fine tuning, Select the desired programme position

21. Programming stations

wish to replace with the new station).

•Move the cursor to „Frequency/Channel“.

•Press the „OK“ key.

•In the setting window which is then displayed, move the cursor to „Channel“ or „Special chan- nel“.

•Enter the number of the channel or special channel with the numeric keys.

•Press the „OK“ key to save the station.

•Press the „TV“ key to close the menu.

Call the menu

MENU

OK

Fine tuning

When you programme stations, each channel is automatically tuned to the centre frequency. This

is normally sufficient. If this automatic
function does not produce satisfactory
results, you can carry out fine tuning.	Picture-Volume
Executing fine tuning	AV devices
	Station table
• Select the desired programme position.	Timer
• Press the „MENU“ key.	Configuration

• Press the white key	to open the sta-	TVMenü-
			Change value	Channel	6	Cable channel	--
tion table.			with + and –	Frequency 182.31 MHz
• Move the cursor to the subject card			Confirm with OK	Scan operation			ARD

„Frequency/Channel“.

•Press the „OK“ key to confirm your selection.

•In the setting window, select „Frequency“ and use the - + key to change the frequency value until the picture is as clear as possible.

•Save the new setting by pressing the „OK“ key.

•Press the „TV“ key to close the menu.

OK

41