Metz MF 72TL68, MF 82TL95 manual Initial programme position Call the menu, Option

25. Initial programme position Call the menu

You can define a so-called initial programme	MENU
position in this TV set. This is intended primarily to
enable you to switch to the AV programme posi-
tion when you are using an external SAT receiver.
Setting the initial programme position
☞ In a menu with two asterisks (**), the set-	OK
tings for this menu item cannot be chan-
ged.

In the menu „AV devices“ (see also section

24, „AV devices“), select and connect a SAT recei- ver (SAT/SetTop).

• Press the „AV“ key.

• In the „AV playback menu“, use the				Picture-Volume
numeric keys to select the position				AV devices
					Operation	Scope of operation
„SAT/SetTop“.
				Station table
					EURO sockets*
						EPG settings
					Station search
• Press the „MENU“ key to open the TV				Timer		Automatic zoom2)*
			Country*		Sound setting
menu.
		Menü-TV		Configuration
					Language*
						Init. prog. position*
• Press the red key	to open the menu			: select,
„Configuration“.			OK: go to		Switch on with this station? Yes
			settings.

•Use the cursor control key to select „Operation“ and then „Initial programme posi- tion“.

•Press the „OK“ key and then, in the setting win- dow, use the - + key to select „Yes“.

•Press the „OK“ key to save the new setting.

OK

☞After this, the AV programme position will

be selected automatically if you switch your

TV set on with the main switch and then

press the key on the remote control unit. 2) Available only on TV sets which are equipped with this

option.

* The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu.

47