II key | Metz MF 72TL68, MF 82TL95 specs

19.1 Activating the EPG NexTView Call the menu

The EPG function can be switched on by pressing the keys "F3" if an EPG programme position is defined in the menu (see below).

On all programme positions where NexTView is received, the TV set displays the following messa- ge after a short delay:

This station is sending NexTView (EPG). Save it as the EPG programme position?

F3

MENU

• Yes• No

The TV set is asking you whether you want to use	OK
The TV set is asking you whether you want to use
this programme position for collecting the data for
the EPG NexTView.

Press the red key for "No" - this pro- gramme position is not used for recei- ving the NexTView data. The message is still displayed for all other programme positions where NexTView data are received.

Press the green key for "Yes" - this pro- gramme position will be used for recei- ving the NexTView data. The message is then not displayed for other programme positions where NexTView data are received.

TV-Menü

Picture-Volume

AV devices

Station table

Timer Configuration

: select, OK: go to settings.


	Operation		Scope of operation
	EURO sockets*		EPG settings
	Station search		Automatic zoom2)*
	Country*		Sound setting
	Language*		Init. prog. position*


	EPG	on	EPG prog. position	6
	Now showing	on	Kabel 1

If you know the programme position for a

NexTView station, you can also enter its number OK directly on the numeric keys.

You can overwrite any existing programme posi- tion number or delete the number by pressing the

IIkey.

* The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu.

Not possible with an external satellite receiver!

33

Image 33

Metz MF 72TL68, MF 82TL95 manual Activating the EPG NexTView Call the menu, II key

Contents

Operating instructions ForewordContents Installation Safety notes Safety notes Most important keys in normal use Remote control unit Overview of key functions You can adjust the volume with the + key Setting the operating modeDaily operation Will select this programme position Station selection and programme posi- tion management Selecting stations Call the menu Call the info 7. Help function Information Using the menus Call the menu Left. Otherwise, page 100 appears Are displayed see the picture onSee the lower picture Case of „TOP stations, you Teletext Teletext subtitles AV playback Press the red key To open the menu „Configuration Picture quality when playing back from tape machines Copying between AV devices + key to change the setting Individual picture settings3rd line in the setting window Save the new setting as the standard Picture settings, general Use the cursor control key to selectPress the TV key to close the TV menu Timer Configuration Picture settings for a specific Programme position Setting you want to change Sound settings, generalSelection and then, in the setting win Press the „OK key and then select Sound settings for a specific programme position PAL, SECAM, NTSC, NTSC44, PAL60, PAL M Colour standard Call the menu Call the menu Automatic zoom Childlock Call the menu Call the menu15. Childlock Press the „TV key to close the menu Reminder Call the menu Picture-Volume AV devices Timer control Reminder Current date Childlock Timer control Call the menu Calling the picture format3 function Special functions Picture format Special functions Picture position Special functions Zoom Not possible with an external satellite receiver EPG NexTView II key Activating the EPG NexTView Call the menu Collecting NexTView data Collection operation is interrupted or cancelled if Using NexTView Call the menu Call the menu Using NexTView Selection Interest Users Record Using NexTView Call the menu Recording a programme Displayed in the selected language Help function Information are then Programming stations Call the menu Programming stations Executing fine tuning Select the desired programme positionPress the „MENU key Call the menu 22. Station logo Each station which transmits VPS signals alsoWork correctly, or if you want a different station Logo, you can overwrite the logo manually Copying, shifting and deleting stations Sorting stations Call the menu Menü AV devices Call the menu Call the menu AV devices You can define a so-called initial programme Initial programme position Call the menuPosition in this TV set. This is intended primarily to Option Setting the operating scope Programming the operating scope Changing programme positions Press the -/+ keys Volume Operation without the remote control unitOr + key to adjust the volume Contrast Or + key to adjust the contrast Technical data 12 W8 W Options Cleaning the TV set Connecting headphones CTI Glossary VCR Standard settings Such as camcorders and video recorders Forced mono Few seconds and then Switch it on again Logic video recorder as Such as a DVD play AV playback, devices with switching voltage IndexGlossary Programme guide see NexTView Errors excepted. Subject to changes Page Metz allways first class