Metz MF 72TL68, MF 82TL95 manual Picture settings, general, Use the cursor control key to select

11.Picture settings, general

☞In a menu with two asterisks (**), the set- tings for certain menu items cannot be changed.

Panorama2) function

☞This setting can be made only on 16:9 TV sets.

The panorama function can be used to expand "normal" programmes in 4:3 format to the 16:9 format. This is done by increasing the width of the picture to fill the complete width of the screen.

Call the menu

MENU

OK

Setting Panorama2) mode:

•Press the "MENU" key to open the TV menu.

•Press the "OK" key to open the menu "Picture and sound".

•Use the cursor control key to select "Panorama".

•Press the "OK" key and then, in the setting window, use the - + key to change the setting for "Panorama".

TV-Menü

Picture-Volume

AV devices

Station table

Timer Configuration

: select, OK: go to settings.

Picture pos., vertica Panorama2)*

CTI*

Comb filter*

Noise reduction*

Sound set.prog.po Picture sharpness* Sound settings, gen. Colour intensity Pict. set.,prog. posn.* Contrast

Pict. settings, gen. Brightness

Panorama On, zoom 1 Mode Non-linear

•Use the cursor control key to select the

menu item "Mode" and use the - + key to select either "linear" or "non-linear".

•Press the "OK" key to save your changes. The picture shows the factory setting.

•Press the "TV" key to close the TV menu.

☞The functions "Panorama2)" and "Zoom" can also be used together.

OK

OK

2)Available only on TV sets which are equipped with this option.

*The number of subjects and sections displayed here depends on the opera- ting scope setting in the menu.

19