Blaupunkt RCR 128 Scanning stations with PTY Scan, Storing programme types, PTY priority

Page 13
29

• press / to start the seek tuning

Scanning stations with PTY SCAN

Example:

function.

Requirement: “PTY” must appear in the dis- German broadcasting network NDR:

If the radio is unable to find a station offer-

play.

- Station playing: NDR3.

ing the selected programme type, the dis-

• Press the SRC/SC button until you

- “PTY” lights up in the display.

play will show “NO PTY” and a beep tone

hear a beep.

- Programme type “POP” selected.

will be emitted. The radio will select the sta-

All of the stations in your current re-

tion which was tuned into before seek tun-

- Seek tuning is started.

ception area offering the selected pro-

ing was activated.

 

gramme type will be scanned.

- No station with “PTY-POP” can be

 

Storing programme types

To switch off PTY-SCAN:

found.

• Press SRC/SC or the seek-tuning

- The display shows “NO PTY” and

Each of the preset buttons 1-6 has been

rocker switch once again.

- automatically switches back to NDR3.

assigned one programme type at the facto-

 

- NDR2 airs a “PTY-POP” programme.

ry.

PTY priority

 

If desired, you can also replace these with

- The radio will switch to the linked sta-

Situation:

other available programme types.

tion NDR2 for the duration of the

 

To do so, make sure that “PTY” lights up in PTY is switched on and lights up in the dis-

“POP” programme.

the display.

play.

 

• If necessary, press the PTY button to

No station offering the selected programme

During cassette operation, the set will also

switch on the function.

type can be found currently in your recep-

switch to the programme offering the select-

• Select a programme type using but-

tion range (with seek tuning or scan).

ed PTY within the broadcasting network.

The set will switch back to the station previ-

After the PTY programme has ended the

tons << >> and

ously tuned into.

system will switch back to the previous mode

• hold down the desired preset button

As soon as it is possible to receive a pro-

(radio or cassette).

(1-6) until you hear a beep.

gramme in the broadcasting network with

 

Now the selected programme type can be

 

the PTY selected, the radio will switch over

Note:

recalled by pressing this preset, if “PTY”

to the corresponding station for the dura-

As already mentioned, these functions are

lights up in the display.

tion of the programme.

only supported by a limited number of RDS

stations at the present time.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

Image 13
Contents Dresden RCR 128 Boston RCR Page Display field DisplayContents REL Quick referenceAUD F DSC-MODE E PTY SRC/SC= BA/TS AF·TAAUD Installation Traffic safetyImportant notes What you need to knowClock Setting the clockTheft protection Fixing the release panel Radio operation with RDS Radio Data SystemREG regional programme AF Alternative frequencySwitching between the memory banks FM Station tuningSelecting a waveband Scrolling through the broadcast- ing networks FM onlyRecalling stored stations Selecting the automatic tuning sensitivityScanning stations with Radio Scan PTY Programme TypeVaried POP Music Rock Music Classics Storing programme types Scanning stations with PTY ScanPTY priority Switching the warning beep off Automatic seek tuning startTraffic programme station reception with RDS-EON Traffic announcement priorityCassette playback Cassette deck operationCassette eject Traffic information during Fast windingREG DSC programmingRegional function on/off Specifications Overview of the DSC factory settingsAppendix Blaupunkt-Werke GmbH