JVC KD-SX980, GET0091-001A Installing the battery, Place the battery, Return the battery holder

Page 5

Preparing the remote controller

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.

Remote sensor

2.Place the battery.

Slide the battery into the holder with the + side facing upwards so that the battery is fixed in the holder.

Lithium coin battery (product number: CR2025)

ENGLISH

3.Return the battery holder.

Insert again the battery holder pushing it until you hear a clicking sound.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).	(back side)

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

1.Remove the battery holder.

1)Push out the battery holder in the direction indicated by the arrow using a ball-point pen or a similar tool.

2)Remove the battery holder.

(back side)

WARNING:

•Store the battery in a place where children cannot reach.

If a child accidentally swallows the battery, consult a doctor immediately.

•Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Doing any of these things may cause the battery to give off heat, crack or start a fire.

•Do not leave the battery with other metallic materials.

Doing this may cause the battery to give off heat, crack or start a fire.

•When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack or start a fire.

•Do not poke the battery with tweezers or similar tools.

Doing this may cause the battery to give off heat, crack or start a fire.

CAUTION:

DO NOT leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

5

Image 5

Contents For customer Use KD-SX980Information For U.S.A How to reset your unitPrecautions Contents Display window Location of the ButtonsControl panel Place the battery Installing the batteryReturn the battery holder Remove the battery holderRM-RK50 Remote controllerTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio Basic OperationsSearching a station automatically Auto search Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Tune in to a station you want while Manu is flashingFM1 Tuning in to a preset stationTo stop play and eject the disc CD OperationsPlaying a CD To fast-forward or reverse the track Locating a track or particular portion on a discTo go to a particular track directly To play back tracks at random Random PlayPlaying a CD Text Select text display mode while playing a CD TextProhibiting CD ejection To play back only intros Intro ScanPrecautions when recording MP3 files on a CD-R or CD-RW What is MP3?MP3 Introduction How are MP3 files recorded and played back?MP3 playback/search order MP3 directory/file configurationHierarchy Level6Playing an MP3 disc MP3 OperationsClose the panel by hand Refer also to CD Operations on pages 11 toTo change the display information Locating a file or particular portion on an MP3 discTo fast-forward or reverse the file To skip to the next or previous filesTo skip to the next directory To go to a particular directory directlyTo select a particular file in a directory, press ¢ or 4 after selecting the directorySelecting MP3 playback modes CanceledTo skip to the previous directory To play back files at random Random PlayINT1 INT2 To play back files repeatedly Repeat PlayRPT1 RPT2 Adjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustSelect the sound mode you want Selecting preset sound modes C-EQ custom equalizerIndication For Preset values Press EQRepeat steps 2 and 3 to adjust Storing your own sound AdjustmentsCall up the sound mode you want to adjust Repeat the same procedure to store other sound modesChanging the general settings PSM Setting the clockBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items To select the scroll mode Scroll To select the dimmer mode DimmerTo set the clock display Clock To select the level meter LevelAssigning names to the sources To adjust the auxiliary input level AUX ADJTo turn the tag display on or off TAG Disp Select a source you want to assign a name toTo erase the input characters Insert spaces using the same procedure described aboveSelect a character See next column for available charactersDetaching the control panel You can detach the control panel when leaving the carAttaching the control panel Select the CD automatic changer CD-CH CD CD-CH CD Changer OperationsPlaying CDs To show the CD Text information To go to a particular disc directlyTo go to the next track or the previous tracks To go to the next discs or the previous discsSelecting CD playback modes Mode Indication Plays the first SecondsTo play back tracks at random Random Play To play back tracks repeatedly Repeat PlayPlaying an external component External Component OperationsSelect the external component Line in or AUX You want. See pages 21Symptoms Causes Remedies TroubleshootingTracks on the CD-R/CD Finalize the CD-R/CD-RW GeneralMP3 Reset button of the CD changer Reset 1 ResetHow to handle discs MaintenanceHandling discs Moisture condensationPower Requirement SpecificationsFM Tuner AM TunerCall