Note:
For connecting the Line Input Adaptor
Manual (separate volume).
To adjust the auxiliary input level – AUX ADJ
Adjust the auxiliary input level properly when an external component is connected to the MP3 INPUT jack.
When shipped from the factory, the auxiliary input level is set at level “00.”
If the input level of the connected component is not high enough, increase the input level properly. Without adjusting the line input level, you may be surprised at a loud sound when you change the source from the external component to another source.
Assigning names to the sources
You can assign names to station frequencies and discs (both in this unit and in the CD changer). After assigning a name, it will appear on the display when you select the source.
Sources | Maximum number of |
| characters |
|
|
Station frequencies | up to 8 characters (up to |
| 30 station frequencies |
| including both FM and AM) |
|
|
CDs* | up to 32 characters |
| (up to 40 discs) |
*You cannot assign a name to a CD Text or an MP3 disc.
ENGLISH
To turn the tag display on or off – TAG DISP
An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.
There are two
When shipped from the factory, “TAG ON” is selected.
•TAG ON: Turns on the ID3 tag display while playing MP3 files.
•If an MP3 file does not have ID3 tags, directory name and file name appear.
Note:
If you change the setting from “TAG OFF” to “TAG ON” while playing an MP3 file, the tag display will be activated when the next file starts playing.
•TAG OFF: Turns off the ID3 tag display while playing MP3 files. (Only the directory name and file name can be shown.)
1 Select a source you want to assign a name to.
When you select a source, the power automatically
comes on.
2 Press and hold SEL (select) for more than 2 seconds while pressing DISP (display).
Ex.: When you select CD as the source
CONTINUED ON THE NEXT PAGE
27