PYLE Audio PRJHD198 Menu setting, Image adjustment, Focus adjustment, Image menu adjustment, use

Image adjustment

The new projector using it first time commonly will appear image faintness and the the image is trapezoid it is course that not adjust well of the lens focus and the trapezoid

please follow the step the correction

Focus adjustment

• turn the lens into the projector then turn it out slowly

at the same time looking at the resolution point carefully

when the image is very clearly (take the middle area of the image),it is the best situation of the lens

NOTE: When you replace the projector from a cold to a warm environment water vapour might occur. Don't turn the projector on when this occurs but wait until the vapour has disappeared.

KEYSTONE

If a projected picture has keystone distortion, correct image with Keystone adjustment. The image becomes trapezoid shape when the screen or project is not level. Please reposition the projector to improve its angle to the screen. However, the circumference of the image may not be focussed.

Projector

Projector

Keystone Screen Screen

If not able to use the Keystone correction function to correct the trapezoid distortion,

Menu setting

Menu setting method

1.	Using the projector			press menu		key,
	the picture disply on screnn to adjust the
	menu(picture one)
2.	press		key		the menu in turn
	circle	into image		>	volume	>
	function		> system > setting >
	image	adjust interface
3. Elect the adjust interface					use	key
elect the item that need to adjust(picture two
4. use			key to adjust the elect item paremeter
5. Finished the elect item parameter press the
	menu	key again		exit the page
6. Repeat operate the 2				5step
till finished all the parameter's enactment
press exit			key,exit the menu page
otherwise			the menu page will auto exit

after a period time

1. Image menu adjustment

a. Press menu key untile disply the above picture of the menu

b. Press key elect the option that need to adjust

c. Press key adjust parallelisn elect parameter.

d. Press the "menu" key again exit

the menu page parameter adjust station.

• •