JVC GET0074-001A Playing the current tune repeatedly, Skipping the blank portions on the tape

Page 21

Other convenient tape functions

Skipping the blank portions on the tape

You can skip blank portions between the tunes (Blank Skip).

When this function is on, the unit skips blank portions of 15 seconds or more, fast-forwards to the next tune, then starts playing it.

•See also “Changing the general settings (PSM)” on pages 25 and 26.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 26.)

2 Press ¢ or 4 to select “B. SKIP” (blank skip).

3 Turn the control dial clockwise to select “ON.”

Now Blank Skip is activated.

4 Press SEL (select) to finish the setting.

To cancel Blank Skip, repeat the same

procedure and select “OFF” in step 3 by turning

the control dial counterclockwise.

Playing the current tune repeatedly

You can play the current tune repeatedly (Repeat Play).

1 Press MODE (M) to enter the functions mode while playing a tune you want to hear over again on a cassette.

“MODE” appears on the upper part of the display, and the number buttons work as different function buttons.

2 Press RPT (repeat), while “MODE” is still on the display, so that the RPT indicator lights up on the display.

Lights up when Repeat Play is turned on.

When the tune has been played, the tape is automatically rewound to the beginning of that tune and the same tune will be played again.

To cancel Repeat Play, repeat steps 1 and 2 above again so that the RPT indicator goes off.

Note:

In the following cases, Blank Skip and Repeat Play may not operate correctly:

–Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during tunes.

–Tapes with short non-recorded sections.

–Tapes with high level noise or humming between tunes.

–Tapes with tunes recorded at low recording levels.

–The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with no Dolby NR.

ENGLISH

21

Image 21

Contents KS-LH6R/KS-LH4R How to use the Mode M How to reset your unitContents Location of the Buttons Control panelDisplay window Place the battery Installing the batteryReturn the battery holder Remove the battery holderRM-RK50 Remote controllerTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio OperationsSearching a station automatically Auto search Start searching a stationWhen an FM stereo broadcast is hard to receive Searching a station manually Manual searchTune in to a station you want while Manu is flashing Manual preset FM station automatic preset SSMSelect the FM band FM1 3 you want to store FM stations into Press and hold both buttons for more than 2 secondsTuning in to a preset station RDS Operations What you can do with RDSTo use Network-Tracking Reception To deactivate the TA Standby Reception, press TP/PTY T again Using TA Standby ReceptionTo select your favourite programme for PTY Standby Reception Using PTY Standby ReceptionSearching your favourite programme Changing the display mode while listening to an FM station Automatic clock adjustment Setting the TA volume levelFolk M PTY codesListening to a cassette Tape OperationsTo stop play and eject the cassette To fast-forward and rewind a tapeTo cancel the prohibition and unlock To cancel the Dolby B NR, repeat steps 1 and 2 above againProhibiting cassette ejection To play back tapes recorded with the Dolby B NRTo cancel Blank Skip, repeat the same Press SEL select to finish the settingPlaying the current tune repeatedly Skipping the blank portions on the tapeAdjusting the sound Sound AdjustmentsSelect the item you want to adjust Adjust the levelPress Mode M Selecting preset sound modes C-EQ custom equalizerPress EQ equalizer while Mode is still on the display Select the sound mode you wantPress EQ equalizer while Mode still on the display Storing your own sound adjustmentsWhen CEQ Link is set to Link OFF To reset to the factory settings, repeatChanging the general settings PSM Setting the clockBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items 24H/12HEXT To set the clock display Clock To select the dimmer mode DimmerTo select the level meter Level To select the telephone muting TELDetaching the control panel Attaching the control panelUnlock the control panel Playing CDs CD Changer OperationsSelect the CD automatic changer CD CD automatic changerTo go to the next or previous tracks To fast-forward or reverse the trackTo go to a particular disc directly To go to the next discs or the previous discsRPT1 RPT2 Canceled RND1 RND2 CanceledSelect the external component Line External Component OperationsSelect the DAB tuner What is DAB system?Select the DAB band DAB1, DAB2 or DAB3 Before you startSelect a service you want to listen to To restore the FM/AM tunerService name Ensemble name Channel number Frequency To tune in to a particular ensemble without searchingStore the selected service into for More than 2 seconds Storing DAB services in memorySelect the DAB band DAB1, DAB2 or DAB3 you want Press and hold the number buttonSelect the number 1 6 for the preset DAB service you want ServiceWhile receiving a DAB service To use Alternative ReceptionTo clean the head MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on playSymptoms Causes Remedies TroubleshootingFM Tuner SpecificationsMW Tuner LW TunerHaving Trouble with operation?