JVC GET0074-001A manual Troubleshooting, Symptoms Causes Remedies

Page 38

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

	Symptoms		Causes					Remedies

•	A cassette tape cannot be	You have tried to insert a			Insert the cassette with the
	inserted.	cassette the wrong way.			exposed tape facing to the right.

• A cassette tape cannot be		Cassette ejection is prohibited.			Press and hold TAPE CD-CH
	ejected.				and				for more than two


					seconds.

• Cassette tapes become hot.		This is not a malfunction.
• Cassette tapes become hot.		This is not a malfunction.

•	Tape sound is at very low	The tape head is dirty.			Clean it with a head cleaning
	level and sound quality is				tape.
	degraded.

• Sound is sometimes		Connections are not good.			Check the cords and
	interrupted.				connections.

•	Sound cannot be heard from	The volume is turned to the			Adjust it to the optimum level.
	the speakers.	minimum level.

		Connections are incorrect.			Check the cords and
					connections.

•	SSM (Strong-station	Signals are too weak.			Store stations manually.
	Sequential Memory)
	automatic preset does not
	work.

•	Static noise while listening to	The antenna is not connected			Connect the antenna firmly.
	the radio.	firmly.

• “NO DISC” appears on the		No CD is in the magazine.			Insert CDs into the magazine.
	display.
	display.	CDs are inserted incorrectly.			Insert them correctly.
		CDs are inserted incorrectly.			Insert them correctly.

• “RESET 8” appears on the		This unit is not connected to a			Connect this unit and the CD
	display.	CD changer correctly.			changer correctly and press the
					reset button of the CD changer.

• “RESET 1” - “RESET 7”					Press the reset button of the
	appears on the display.				CD changer.
	appears on the display.				CD changer.

• This unit does not work at all.		The built-in microcomputer may			Press the reset button on the
• The CD changer does not		function incorrectly due to			panel holder. (The clock setting
	work at all.	noise, etc.			and preset stations stored in
					memory are erased.)
					(See page 2.)

38

Image 38

Contents KS-LH6R/KS-LH4R How to reset your unit How to use the Mode MContents Display window Location of the ButtonsControl panel Return the battery holder Installing the batteryPlace the battery Remove the battery holderRemote controller RM-RK50To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSearching a station automatically Auto search Radio OperationsListening to the radio Start searching a stationTune in to a station you want while Manu is flashing When an FM stereo broadcast is hard to receiveSearching a station manually Manual search Select the FM band FM1 3 you want to store FM stations into FM station automatic preset SSMManual preset Press and hold both buttons for more than 2 secondsTuning in to a preset station To use Network-Tracking Reception RDS OperationsWhat you can do with RDS Using TA Standby Reception To deactivate the TA Standby Reception, press TP/PTY T againUsing PTY Standby Reception To select your favourite programme for PTY Standby ReceptionSearching your favourite programme Changing the display mode while listening to an FM station Setting the TA volume level Automatic clock adjustmentPTY codes Folk MTo stop play and eject the cassette Tape OperationsListening to a cassette To fast-forward and rewind a tapeProhibiting cassette ejection To cancel the Dolby B NR, repeat steps 1 and 2 above againTo cancel the prohibition and unlock To play back tapes recorded with the Dolby B NRPlaying the current tune repeatedly Press SEL select to finish the settingTo cancel Blank Skip, repeat the same Skipping the blank portions on the tapeSelect the item you want to adjust Sound AdjustmentsAdjusting the sound Adjust the levelPress EQ equalizer while Mode is still on the display Selecting preset sound modes C-EQ custom equalizerPress Mode M Select the sound mode you wantWhen CEQ Link is set to Link OFF Storing your own sound adjustmentsPress EQ equalizer while Mode still on the display To reset to the factory settings, repeatBasic Procedure Setting the clockChanging the general settings PSM Other Main FunctionsEXT Preferred Setting Mode PSM items24H/12H To select the level meter Level To select the dimmer mode DimmerTo set the clock display Clock To select the telephone muting TELUnlock the control panel Detaching the control panelAttaching the control panel Select the CD automatic changer CD CD Changer OperationsPlaying CDs CD automatic changerTo go to a particular disc directly To fast-forward or reverse the trackTo go to the next or previous tracks To go to the next discs or the previous discsRND1 RND2 Canceled RPT1 RPT2 CanceledExternal Component Operations Select the external component LineSelect the DAB band DAB1, DAB2 or DAB3 What is DAB system?Select the DAB tuner Before you startService name Ensemble name Channel number Frequency To restore the FM/AM tunerSelect a service you want to listen to To tune in to a particular ensemble without searchingSelect the DAB band DAB1, DAB2 or DAB3 you want Storing DAB services in memoryStore the selected service into for More than 2 seconds Press and hold the number buttonWhile receiving a DAB service ServiceSelect the number 1 6 for the preset DAB service you want To use Alternative ReceptionTo keep the tape clean MaintenanceTo clean the head Ignition key-off release/Ignition key-on playTroubleshooting Symptoms Causes RemediesMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation?