JVC GET0074-001A manual Setting the TA volume level, Automatic clock adjustment

Page 17

Automatic selection of the station when using the number buttons

Usually when you press the number button, the preset station is tuned in.

However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting. (Programme search)

•The unit takes some time to tune in to another station using Programme search.

To activate programme search, follow the procedure below.

•See also “Changing the general settings (PSM)” on pages 25 and 26.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “P(Programme)-SEARCH.”

3 Turn the control dial clockwise to select “ON.” Now programme search is activated.

4 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same procedure and select “OFF” in step 3 by turning the control dial counterclockwise.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on pages 25 and 26.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TA VOL.”

3 Turn the control dial to set to the desired volume. You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on pages 25 and 26.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “AUTO ADJ.” 3 Turn the control dial counterclockwise to select

“OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the same procedure and select “ON” in step 3 by turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than 2 minutes after setting “AUTO ADJ” to “ON.” Otherwise, the clock time will not be adjusted. (This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal.)

ENGLISH

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents KS-LH6R/KS-LH4R How to use the Mode M How to reset your unitContents Display window Location of the ButtonsControl panel Place the battery Installing the batteryReturn the battery holder Remove the battery holderRM-RK50 Remote controllerTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio OperationsSearching a station automatically Auto search Start searching a stationTune in to a station you want while Manu is flashing When an FM stereo broadcast is hard to receiveSearching a station manually Manual search Manual preset FM station automatic preset SSMSelect the FM band FM1 3 you want to store FM stations into Press and hold both buttons for more than 2 secondsTuning in to a preset station To use Network-Tracking Reception RDS OperationsWhat you can do with RDS To deactivate the TA Standby Reception, press TP/PTY T again Using TA Standby ReceptionTo select your favourite programme for PTY Standby Reception Using PTY Standby ReceptionSearching your favourite programme Changing the display mode while listening to an FM station Automatic clock adjustment Setting the TA volume levelFolk M PTY codesListening to a cassette Tape OperationsTo stop play and eject the cassette To fast-forward and rewind a tapeTo cancel the prohibition and unlock To cancel the Dolby B NR, repeat steps 1 and 2 above againProhibiting cassette ejection To play back tapes recorded with the Dolby B NRTo cancel Blank Skip, repeat the same Press SEL select to finish the settingPlaying the current tune repeatedly Skipping the blank portions on the tapeAdjusting the sound Sound AdjustmentsSelect the item you want to adjust Adjust the levelPress Mode M Selecting preset sound modes C-EQ custom equalizerPress EQ equalizer while Mode is still on the display Select the sound mode you wantPress EQ equalizer while Mode still on the display Storing your own sound adjustmentsWhen CEQ Link is set to Link OFF To reset to the factory settings, repeatChanging the general settings PSM Setting the clockBasic Procedure Other Main FunctionsEXT Preferred Setting Mode PSM items24H/12H To set the clock display Clock To select the dimmer mode DimmerTo select the level meter Level To select the telephone muting TELUnlock the control panel Detaching the control panelAttaching the control panel Playing CDs CD Changer OperationsSelect the CD automatic changer CD CD automatic changerTo go to the next or previous tracks To fast-forward or reverse the trackTo go to a particular disc directly To go to the next discs or the previous discsRPT1 RPT2 Canceled RND1 RND2 CanceledSelect the external component Line External Component OperationsSelect the DAB tuner What is DAB system?Select the DAB band DAB1, DAB2 or DAB3 Before you startSelect a service you want to listen to To restore the FM/AM tunerService name Ensemble name Channel number Frequency To tune in to a particular ensemble without searchingStore the selected service into for More than 2 seconds Storing DAB services in memorySelect the DAB band DAB1, DAB2 or DAB3 you want Press and hold the number buttonSelect the number 1 6 for the preset DAB service you want ServiceWhile receiving a DAB service To use Alternative ReceptionTo clean the head MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on playSymptoms Causes Remedies TroubleshootingFM Tuner SpecificationsMW Tuner LW TunerHaving Trouble with operation?
Top Page Image Contents