11
Disassembling your blender for cleaning,care and storage
Step 1.
Always make sure the Breville ikon Blender is off by
pressing the ‘Power’ button on the control panel.
Then turn off at the power outlet and unplug the
power cord.
Step 2.
Remove the blender pitcher from the motor base
by grabbing the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by turning the blender
pitcher over and twisting the 1/4turn Blade Removal
System clockwise for 1/4of a turn to unlock (see Fig
1), then lift upwards and away from the base of the
blender jug.The circular plastic surround attached to
the base of the blender jug is not removable.
Step 4.
Remove the silicon seal from the blade assembly
The Breville ikon Blender features a 1/4turn Blade
Removal System for the easy removal of the
blade for cleaning.
Note
Operating your Breville ikon Blender
continued
Step 10.
For ingredients that require short bursts of power,
select the ‘PULSE’ function.The ‘PULSE’ button will
illuminate and remain illuminated while the button is
pushed.When this function is selected, the LCD timer
screen will illuminate and count upwards in one
second increments during pulsing. Press the ‘PULSE’
button in short bursts until blending is complete.
Use the ‘PULSE’ button when the food that is
being processed is too thick or coarse to
circulate within the blender pitcher.
Note
Step 11.
At the end of use, always make sure the Breville ikon
Blender is turned off by pressing the ‘Power’ button
on the control panel and then unplug the cord. Make
sure the motor and blades have completely stopped
before attempting to move the appliance, or when the
Breville ikon Blender is not in use and before
disassembling, cleaning and storing.
• During the blending process, ingredients may
stick to the sides of the blender pitcher.To
push the food back onto the blades, press the
‘Power’ button on the control panel and
remove the power cord. Remove the lid and
use a plastic spatula to scrape down the sides
of the pitcher.Replace the lid before
recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the ‘Power’
button on the control panel, switch off at the
power outlet and remove the power plug.
Remove the blender pitcher.Wipe the motor
base immediately with a dry cloth or paper
towel to absorb the liquid. Check that the
blender pitcher is correctly assembled.
Note
10
Fig 1
BR8112 BBL600XL_book 16/1/07 9:17 AM Page 10