Breville BBL600XL manual Operating your Breville ikon Blender

Operating your Breville ikon Blender continued

The Breville ikon Blender features a patented* assist lid. This allows the lid to fit tightly onto the blender pitcher, avoiding displacement during operation. The ring pull design allows the user to easily remove the lid with a simple leverage action. (See Fig 1)

Note

Fig 1

Step 5.

Plug the power cord into a 110 / 120V power outlet and turn on.

Step 6.

Press the ‘Power’ button on the far left of the control panel to turn the blender on. The ‘Power’ button will illuminate and flash. The LCD timer screen will illuminate with ‘00’ displayed.

Do not fill the blender pitcher above the ‘MAX’ line. When the blender pitcher is filled at or near the ‘MAX’ line place one hand on the blender lid to avoid displacement of the lid during operation.

Note

Step 7.

Select the required speed (1 to 5) by pressing the corresponding speed button. The blender will start to operate and the selected speed button will illuminate. The ‘Power’ button will illuminate and cease to flash. The ‘Stop’ button will illuminate and flash. The LCD timer screen will start counting upwards in one second increments until 60 seconds is reached.

Operate the blender only for the appropriate amount of time required – do not over process.

Note

Step 8.

When 60 seconds is reached, the blender will automatically cease to operate and the selected speed button and ‘Stop’ button illumination will go out. The ‘Power’ button will illuminate and flash. After a few seconds the LCD timer screen will revert to ‘00’.

•The ikon Blender will automatically stop blending after 60 seconds This is a safety feature.

•To stop blending at any time, press the ‘Stop’ button or the selected speed button. The ‘Power’ button can also be pressed, but this will also turn the appliance off and all illuminations will go out.

•The speed can be changed at any time during the blending process. Each time a new speed is selected its button will illuminate and the previous speed button illumination will go out. The number of seconds on the LCD timer screen is not interrupted and will continue to count upwards to 60 seconds unless interrupted.

Note

Step 9.

The Breville ikon Blender features two additional functions, ‘ICE CRUSH’ and ‘SMOOTHIE’. These are pre-programmed cycles which automatically adjust the blending time and speeds to optimize blending results. Select the required function by pressing the corresponding function button. The blender will start to operate and the selected function button will illuminate. The ‘Power’ button will illuminate and cease to flash. The ‘Stop’ button will illuminate and flash. The LCD timer screen will start counting down in one second increments until ‘00’ is displayed.

When ‘00’ seconds is reached, the blender will automatically cease to operate and the function button and ‘Stop’ button illumination will go out. The ‘Power’ button will illuminate and flash.

•To stop blending at any time, press the ‘Stop’ button or the selected function button. The ‘Power’ button can also be pressed, but this will also turn the appliance off and all illuminations will go out.

•The maximum amount of ice cubes the blender can blend at any one time is 1 standard ice tray or 9 oz.

Note

NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON BLENDER WHILE THE MOTOR IS RUNNING.

8 9