Care and cleaning
13

Cleaning the motor base

•Wipe the motor base with a soft, damp cloth then
dry thoroughly.
•Wipe any excess food particles from the
power cord.
Do not use abrasive souring pads or cleaners
when cleaning the motor base as they may
scratch the surface.
Note

Cleaning the blender pitcher,lid, inner

lid and blade assembly

•Wash all parts in warm soapy water with a soft
cloth.Use a brush to dislodge stubborn foods.
Rinse and dry thoroughly.
•All jar,lid and blade assembly parts may also be
washed on the top shelf of any dishwasher

Removing stubborn or strong food stains

and odors

Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odor or
stain on the blender pitcher and lid.To remove, soak
blender pitcher and lid for 5 minutes in warm soapy
water.Then wash with a mild detergent and warm
water,rinse well and dry thoroughly.

Storage

Store your Breville ikon Blender upright with the
blender pitcher,lid and inner lid assembled and
inserted on the motor base or beside it. Do not place
anything on top.
Operating your Breville ikon Blender
continued

Reassembling your blender jug after

cleaning

Step 1.
Make sure all parts are clean and completely dry.
Step 2.
To reassemble the blender,replace the silicon seal
onto the blade assembly (see Fig 1).Turn the blender
pitcher over and insert the blade assembly housing
into the pitcher base (see Fig 2),making sure to align
the indicator symbol ( ) on the inside of the
pitcher base, with the indicator symbol ( ) on
the blade housing.Twist the 1/4turn Blade Removal
System anticlockwise in the direction of the indicator
symbol ( ) until firmly locked into position.
12

BE CAREFUL WHEN HANDLING THE BLENDING BLADES AS THEY ARE SHARP.

MISHANDLING OF THE BLADES MAY CAUSE INJURY.

Fig 1
Fig 2
BR8112 BBL600XL_book 16/1/07 9:17 AM Page 12