2 Press and hold 4 
/ 
¢ (for
/ 
(for
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
To restore the stereo effect, press the same
button again.
ENGLISH
KS-FX473R KS-F363R
3 Tune into a station you want while “M”
is flashing.
To tune into stations of lower frequencies.
To tune into stations of higher frequencies.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM – MW/LW) until you release the button.
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
FM1 
FM2
FM3 
2 Press and hold both buttons for more than 2 seconds.
When an FM stereo broadcast is hard to receive:
Press MO/RND (for
•Each time you press the button, the MO indicator lights up and goes off alternately.
KS-FX473R KS-F363R
Lights up when receiving an FM broadcast in stereo.
KS-FX473R KS-F363R
“SSM” appears, then disappears when automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No.1 (lowest frequency) to No.6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned into.
7