Toshiba MA-1650-4 owner manual Report Reservation Print Format, Customer File Reports

3. RESERVATION

EO1-11110

3.2 REPORT RESERVATION PRINT FORMAT

TABLE OF RESERVATION OPERATIONS (continued)

RTR Declaration: ON

	Report Name	Mode		Key Operation
		Lock
CUSTOMER FILE REPORTS
(for Check Track Memory type only)
•	All Files Read	X	615	[AT/TL]
• All Files Reset (Version 1.7 or after)		Z	615	[AT/TL]
•	Zone Files Read	X	615	[#] → Zone-start File Code
			[@/FOR] → Zone-end File Code [AT/TL]
•	Zone Files Reset	Z	615	[#] → Zone-start File Code
(Version 1.7 or after)			[@/FOR] → Zone-end File Code [AT/TL]

NOTES: 1. Reservation function is unavailable when the Satellite Terminals perform the transactions in SET, X and Z modes.

2.Reservation function is only an operation to copy report data into the communication buffer. Therefore, actual report cannot be issued by this function. To issue a report, key operation to issue it is further necessary on the Master Terminal. Refer to the next chapter “4. READ AND RESET REPORTS” regarding key operation to issue a report.

3.When Resevation operation is performed before the data is set in the communication buffer, “DT R” will be printed.

When the reservation reset is performed under the condition that the reset data is in the communication buffer, “DT Z” will be printed.

3.2.REPORT RESERVATION PRINT FORMAT

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm Closed: every Wednesday

12-19-1994 MON #1

************************

RESERVE

************************

#111101 Δ Δ Δ Δ

#222202 Δ Δ Δ Δ

.....

#999909 Δ Δ Δ Δ

0160 20:00TM

RTR Symbol

Reservation Symbol

Report Name

RTR Symbol

Register No. and Status

?:	No response
BUSY:	The terminal is busy
Blank:	Other statuses
DT R:	Already reserved
DT Z:	Reset data exists

3-3