Toshiba MA-1650-4 owner manual Remote Slip Printer hardware option Operation

10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11110

10.65 REMOTE SLIP PRINTER (hardware option) OPERATION

Example) Character code “00” is assigned to “SPACE”.

Character code “34” is assigned to “B”.

NOTES: 1. This operation is available any time outside a sale or inside a sale including during the short tendering condition, however except the following.

During the Loan transaction During the Pick Up transaction During the Paid Out transaction

2.Neither the Item Correct transaction nor the Validation Print is effective for this operation.

10.65REMOTE SLIP PRINTER (hardware option) OPERATION

The TEC Remote Slip Printer DRS-207 may be connected to the MA-1650 series ECR as an optional device. The Remote Slip Printer will operate printing if a slip is properly inserted, regardless of the Mode Lock position (except that no print will occur in the “SET” mode or during program verification in the “X” mode).

1.The remote slip printer will automatically activate printing when the slip has properly been set to the printer table.

2.The following are selective status programmable relating to the remote slip printer. Ask the store manager and mark the status selected for your store.

PROGRAM OPTIONS RELATING TO REMOTE SLIP CONTROL

•Remote Slip Print compulsory for any Previous Balance entry in “REG” or “MGR” mode: Standard: FREE (Not compulsory)

Option:	COMPULSORY (applies to any Previous Balance entry whether it is the Manual PB Entry
	type or the Customer File (Check Track) Memory type.

•Code No.(Check No.) Entry Before [CHECK NO.] key at Endorsement Print (Refer to ENDORSEMENT PRINT operation already stated.)

Standard: FREE (Not compulsory)

Option: COMPULSORY

10-49