Toshiba MA-1650-4 PLU Programmed Data Copying, Any time outside a sale except the following case

6. PROGRAMMING OPERATIONS EO1-11110

6.9 PLU Programmed Data Copying

6.9PLU Programmed Data Copying

This operation is used to copy the programmed data of a PLU item and to use it in programming another PLU item, thus eliminating time in PLU programming operation.

CONDITION	To program new PLUs or to change any programmed contents of PLUs:
	Any time outside a sale (except the following case)
	To change the PLU of the copy-destination with sales data not zero:
	After PLU Reset
OPERATION	Mode Lock: SET

4[@/FOR] PLU Code of the copy-destination [PLU] [NS]

PLU Code of the copy-source [PLU]

The programmed data of the copy-source PLU is now copied to the copy-destination PLU (except the PLU Code). Then follow the procedure on the page of Programming or Changing to change data of any required Addresses.

ex.) To program PLU 90701 (7-up Small-B) again that

was once programmed and then deleted, by copying the programmed data of PLU 90601 (Coke Small-B):

Mode Lock: SET, enter 4, depress [@/FOR]

90701 [PLU] (PLU Code of the copy-destination)

[NS]

90601 [PLU] (PLU Code of the copy-source) 2 [ST] 307 [#] 213 [#] 705 [#] 700 [#] [#] 503 [#] 613 [#] 601 [#] 612 [#] 612 [#] 213 [#] 402 [#] [ST]

(Address 2, Name changed into: 7-up Small-B) 9 [ST] 7 [#]

(Address 9 , PLU Group No. changed into: 7 ) [AT/TL] (to end this submode)

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm Closed: every Wednesday

12-19-1994 MON #3001

P04

090701

Coke Small-B

#00	090601
#02	7-up Small-B
#09	07

00030

0030

CODING PLUs (supplement to PLU programming operations)

A maximum of 6-digit or 13-digit No. may be assigned to each PLU as PLU Code, depending on the program option selection of the PLU Code digits. Any number within this limit may be assigned to each PLU. The following description is applied to the “Manual PLU Entry System Type”.

DIGIT LENGTH OF PLU CODES

In determining the actual digit length of PLU codes, refer to the following factors:

1)The smaller the digit length, the easier and quicker the PLU sales entries will be.

2)The larger the digit length, the more precise analysis will be possible using various report functions.

3)Some stores may adopt PLU Codes of more than 2 digits (while 1-or 2-digit codes are given to Departments), to prevent confusions or mistakes in key operations.

4)Some stores may use smaller-digit codes for frequently sold PLU items while using larger-digit code for slow- sale items.

6-23