Toshiba MA-1650-4 owner manual Display Message Programming Submode, 31 @/FOR, Character Entries ST

6. PROGRAMMING OPERATIONS EO1-11110

6.18 DISPLAY MESSAGE PROGRAMMING (Submode 31)

6.18DISPLAY MESSAGE PROGRAMMING (Submode 31)

The “DISPLAY MESSAGE” here means the message to be displayed in the 16-digit dot windows of the Operator Display panel (and Customer Display panel if the 16-digit dot windows are installed as hardware option) while the Mode Lock of the terminal is in the “LOCK” position. This display message may be used as information, commercial message, welcoming greeting, etc.

CONDITION

OPERATION

31[@/FOR]

Any time outside a sale

Mode Lock: SET

Message Line No. [ST]

(1 to 4; max. 4 lines)

*

Character Entries [ST]

(Max. 16 characters per line. Regular-size only.)

[AT/TL]

Repeat for other lines. * Allowed for sequential Line No. only

NOTES: 1. When the option “Store Message SCROLLING DISPLAY” is selected, four lines (Line Nos 1 to 4) are available. Even when the option “Store Message 16 CHARACTERS HELD” is selected, four lines (Line Nos 1 to 4) are available.

In this case, refer to “Store Message Display” operation to display the respective message lines.

2.When the “SCROLLING DISPLAY” option is selected, a maximum of 64 characters can be entered consecutively after designating Line No.1 at first and depressing [ST] for each line end.

3.The character must be regular-sized only.

4.The DISPLAY MESSAGE set here will also appear in the REG or MGR mode if so designated by program option.

ex.) To program the following display message under the “SCROLLING DISPLAY” option:

T

H

I

S

C

O

U

N

T

E

R

I

S

Line No. 1

C

L

O

S

E

D

.

P

L

E

A

S

E

Line No. 2

G

O

T

O

A

N

O

T

H

E

R

,

T

Line No. 3

H

A

N

K

Y

O

U

.

.

.

Line No. 4

6-35