Toshiba MA-1650-4 owner manual Address No Description of Programming Contents

6. PROGRAMMING OPERATIONS

EO1-11110

6.8 PLU TABLE PROGRAMMING (Submode 4)

NOTES: 1. The “Address Nos” designation at the top after “4 [@/FOR]” can be skipped if not necessary. If entered, the designated Address (es) will automatically be accessed after the PLU Code designation.

2.A maximum of 65,000 PLUs are programmable (varies depending on the capacity and allocation of the RAM). Also refer to the “CODING PLUs” to be described at the end of this section. The “[PLU]” key here indicates the key labeled simply as “PLU” but not any PLU Preset-code Keys.

3.When the Address No. is sequential from the preceding address (if the Address Designation feature has not been used), the Address No. and the following [ST] can be omitted.

4.The programming contents of each address are further described in the PLU TABLE PROGRAMMING CONTENTS below.

	PLU TABLE PROGRAMMING CONTENTS
Address No.	Description of Programming Contents
1	Linked Department Code
	Enter the 2-digit code of the department to which the PLU is linked. When the PLU is newly
	programmed, this entry is compulsory (an error will result if this entry is skipped.)
	[#]
	1 to 99
2	PLU Name (Descriptor)
	Enter a maximum of 16 regular-sized or 8 double-sized characters. See the CHARACTER
	ENTRIES at the beginning of this chapter. End with [ST].
	When no name is programmed for a PLU, the following will be the auto-program name for
	printing:
	PLUxxxxxx (for PLU Code Max. 6-digit feature)
	PLUxxxxxxxxxxxxx (for PLU Code Max. 13-digit feature)
3	Preset Price
	• For a preset PLU (preset-price PLU, enter a maximum of 6-digit price, and depress [#].
	1 to 999999 (result: $0,01 to $9999,99)
	When the option “Preset Point for one decimal digit allowed” is selected, the decimal digit
	can be entered after entering a maximum of 5 integer digits and the [•]key
	1 to 99999 (result: $0,01 to $999,99) or 0,1 to 99999,9 (result: $0,001 to $999,999)
	• A zero-price ($0,00) may be preset by entering 0 in the above operation.
	• When no numerics are entered and the [#] key is simply depressed, the PLU will be an
	open PLU (open-price PLU).

4Status Selection

•Enter the Status Codes 1 to 8 whose status must be set to ON side. More than one code may be entered. Enter 0 when none of the statuses should be set to ON. However, the Scale-Compulsory Status (Code 5) and HI-CONE Status (Code 6) cannot be combined for one PLU.

Status	Item	Selective Status
Code		OFF	ON
1	Quantity Entry	Optional	Compulsory
2	Net to S.I. 1?	No	Yes
3	Net to S.I. 2?	No	Yes
4	Food Stamp (or GST) Status?	No	Yes
5	Scale Entry	Prohibited	Compulsory
6	HI-CONE Status?	No	Yes
7	Lock or Unlock?	Unlock (in use)	Lock (not in use)
8	Delete Status	No	Delete

-- Continued on next page --

6-15