Toshiba MA-1650-4 owner manual Terminal Designation, To be operated on the Master Terminal only

2. OPERATIONS BEFORE IN-LINE SERVICE EO1-11110

2.2 TERMINAL DESIGNATION

2.2TERMINAL DESIGNATION

This operation can be performed before any in-line service operation. When this operation is skipped, no specific terminals are designated, i.e., the in-line service operations will be performed to all the terminals.

CONDITION	Any time outside a sale
OPERATION	Mode Lock: SET, X, or Z (depending on the in-line service operations to follow)
	RTR Declaration ON Status (i.e., the IN-LINE Lamp should be illuminated)
	To be operated on the Master Terminal only.

[#]

Register No. [#]	[AT/TL]
. . .

Enter the Register No. of the Terminal subject to the in-line service operations to follow.

Repeat for other terminals if more are subject to the in-line service operation.

NOTE: The Terminal Designation once declared by the above operation will be canceled by changing the position of the Mode Lock, or by RTR Declaration Cancel, or by turning OFF and ON the power of the terminal. The designation is automatically canceled on completion of the operation to follow or when a new designation is operated.

ex.) To designate the following Terminal out of two terminals in the system:

Terminal ID No.3: Register No. 3003

Mode Lock: SET (if operated before DLLs)

The RTR Declaration must be ON (i.e., the IN-LINE Lamp must be illuminated; if not, depress the [RTR] key to declare RTR status).

[#] 3003 [#] [AT/TL]

(Issues a receipt, printing the Register Nos. of the terminals designated in the above operation.)

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

19-12-1994 MON #1

P00

03#3003 0023 14:33TM

2-2