Toshiba MA-1650-4 Cashier KEY Method Hardware Option, Push-stay Cashier Locks and Keys, Push-On

7. CASHIER KEY OR CASHIER SIGNING OPERATIONS

EO1-11110

7.2 CASHIER KEY METHOD (Hardware Option)

-- SIGNING OPERATION RECEIPT PRINT FORMAT SAMPLES --

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

12-19-1994 MON #3001

* SIGN ON *

JONES		0062 15:30TM
	* SIGN OFF *
	JONES	0063 15:30TM

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

12-19-1994 MON #3001

* SIGN OUT *

JONES		0070 15:36TM
	* SIGN IN *
	JONES	0071 15:36TM

NOTE: A program option provides a selection not to print nor issue receipts on any signing operation.

7.2.CASHIER KEY METHOD (Hardware Option)

When the [LOG/RECEIPT] (or [LOG]) key is not installed, the Push-stay Cashier Keys may be provided at the side of the Mode Lock:

Push-stay Cashier Locks and Keys

Light to indicate

ON-status

1 2 3 4

Cashier Locks 1 to 4 Cashier keys 1 to 4

Each key is assigned to each cashier. The register will not operate in the “REG”, “MGR”, or “ - ” mode unless one of these keys is inserted and pushed on or pushed-and-locked at the corresponding Cashier Lock. The light is lit when the key is in the ON-status.

Each of the keys may be inserted and pulled out in the neutral position marked with “1” to “4” in the above figure, and two ways are provided to set the Cashier Key to ON status:

PUSH-ON

When simply pushed on and released,the Cashier Key is set to ON status. This ON condition will be cleared by any of the following conditions:

1)when no key-in operations follow in three seconds.

2)when the transaction is finalized.

3)when another Cashier Key is pushed-on when outside a sale.

4)when the Mode Lock is turned to another position.

7-3