Toshiba MA-1650-4 owner manual Terminal ID Setting Submode, 77 @/FOR Terminal ID No. AT/TL, 177

5. PROGRAMMING OPERATIONS EO1-11110

5.3VERIFICATION OF PROGRAMMED DATA RELATED TO IN-LINE SPECIFICATIONS

5.2.2TERMINAL ID SETTING (Submode 77)

This submode is available for in-line terminals (including the master and backup master terminals). It must be operated separately on each terminal since the Terminal ID should vary from terminal to terminal. The data set in this submode is used as the in-line address of the terminal for in-line service operations.

CONDITION	Any time outside a sale
OPERATION	Mode Lock: SET

77 [@/FOR] Terminal ID No. [AT/TL]

Assign No. of 1 to 16.

1:Master

2:Backup Master 3 to 16: Satellites

NOTE: Be certain not to set the same terminal ID No. to terminals on the in-line system.

If terminals with the same ID No. exist on the in-line system, malfunction may occur.

ex.) To assign Terminal ID No. 4 to the terminal used as a Satellite Terminal of the in-line system:

Mode Lock: SET, enter 77, depress [@/FOR]. Enter 4, depress [AT/TL]

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm Closed: every Wednesday

19-12-1994 MON #1

P77

04

0011 14:16TM

5.3VERIFICATION OF PROGRAMMED DATA RELATED TO IN-LINE SPECIFICATIONS

The programmed data related to in-line specifications can be read for verification purposes. A receipt is issued for each operation with the programmed data printed.

CONDITION		Anytime outside a sale (Sign OFF required under Cashier Signing Method)
OPERATION		Mode Lock: X or SET
		(RTR Declaration is unnecessary on the Master Terminal.)
•	Terminal Connection Table		169	[AT/TL]
•	Terminal ID Setting		177	[AT/TL]

NOTES: 1. Verifications listed in the Operator’s Guide of the standalone level are also available on all the terminals of the in-line system.

2.The verification of Terminal Connection Table can be executed on the Satellite Terminals after the DLL operation.

5-3