Toshiba MA-1650-4 Programming, or report taking operations, Item Corr PLU Code PLU ST, 72 @/FOR

7. DEPARTMENT AND PLU MAINTENANCE EO1-11110

7.2 DEPARTMENT PRESET PRICE SETTING OR CHANGING WITH DLL (Submode 72)

Deletion

CONDITION	The sales data of the required PLUs are zero and all terminals are outside a sale,
	programming, or report taking operations.
	(when the feature “PLU not to be inquired” is selected)
	The sales data of the required PLUs are zero and anytime outside a sale for Master.
	(when the feature “PLU to be inquired” is selected)

OPERATION Mode Lock: SET and IN-LINE Lamp illuminated

Barcode Scanning

63 [X] [ITEM CORR] PLU Code [PLU] [ST]

[AT/TL]

Repeatable for other PLUs to be deleted.

7.2DEPARTMENT PRESET PRICE SETTING OR CHANGING WITH DLL (Submode 72)

This submode is used to newly set or change preset prices to required departments, and loads the price data into Satellite Terminals.

CONDITION Any time outside a sale for Master or Satellite

OPERATION

72[@/FOR]

	Mode Lock: SET and IN-LINE Lamp illuminated
			New Preset Price	[DEPT]
		. .		(Department Preset-code Key)
		.
			Max.6 digits; 0 to 999999					[AT/TL]
			(result: $0,00 to $9999,99)
								(NOTE 1)
			Dept Code [DP#]				New Preset Price [#]
					*
Repeatable for other departments.						* For sequentially programming the
							department, the Dept Code specification
							can be skipped.

NOTES: 1. When the [AT/TL] key is depressed in the above operation, it sends a DLL-start command to the designated terminals, makes the terminals in HOLD condition, and executes DLL. After DLL is completed, it sends a DLL-end command to each terminal and releases the HOLD condition.

2.When zero is entered as the New Preset Price value, the department is set with a zero price. When the New Preset Price entry is skipped and the [DEPT] or [#] is simply depressed, it will be an open-price department.

7-3