Toshiba MA-1650-4 owner manual Scale Entry, Unit Price Open Dept

10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11110

	10.31 SCALE ENTRY
10.31 SCALE ENTRY
OPERATION	(The department or PLU through which scale items are entered must be a Scale-Allow
	department or a Scale-Compulsory PLU)

(1)Auto Scale Entry (without tare/tare 2/tare 3, or with tare/tare 2/tare 3 auto-subtraction)

(M)

•Through Dept: Place the item [SCALE] Unit Weight [@/FOR]

on the scale platter.		1 to 9 (LB or Kg), 10 for 1/2 LB
For entry with General Weight Unit	.....	or 100g, 11 for 1/4LB (when the
		Unit Weight is different from the
		General Weight Unit)

Unit Price [Open DEPT] - - -

per Unit Weight

Open-Dept Code [DP#] Unit Price [AMT]

per Unit Weight

•Through Preset-PLU: Place the item on the ([SCALE])

scale platter.

	Preset PLU Code [PLU]	- - -	([SCALE])
• Through Open-PLU: Place the item on the
	scale platter.

Open PLU Code [PLU] Unit Price [AMT] - - -

per Unit Weight

(M)

(M)

NOTES: 1. When the PLU is programmed with a Tare Table No., the tare weight is automatically subtracted from the scaled weight, and thus only the net weight is processed.

2.If the Tare 2 rate is programmed in the PLU table, a Tare 2 entry is performed when the above Preset/Open PLU entry is performed.

(2)Auto Scale with Tare/Tare 2/Tare 3

Tare Table No. [TARE] to be continued to the arrows marked with “(M)” in the above three

1 to 9	operation sequences of the Auto Scale Entry.
Tare Table No. [TARE]	Tare 2 Rate [TARE 2]	to be continued to the arrows
1 to 9	0 to 99.99 (%)	marked with “(M)” in the above
		three operation sequences of the
		Auto Scale Entry.

Tare 2 Rate [TARE 2]

0 to 99.99 (%)

Tare Weight [TARE 3]

Any value other than 0, however, less than the weight of scaled item

to be continued to the arrows marked with “(M)” in the above three operation sequences of the Auto Scale Entry.

to be continued to the arrows marked with “(M)” in the above three operation sequences of the Auto Scale Entry.

10-22