JVC GET0114-001A manual Specifications, FM Tuner, MW Tuner, LW Tuner

Page 37

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

45 W per channel

Rear:

45 W per channel

Continuous Power Output (RMS):

Front:

17 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0V/20 kΩ load (250 nWb/m) Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range:

FM:

87.5 MHz to 108.0 MHz

AM:

(MW) 522 kHz to 1 620 kHz

 

(LW) 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity:

11.3dBf (1.0 ∝V/75 Ω)

50 dB Quieting Sensitivity:

16.3dBf (1.8 ∝V/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60)

Frequency Response: 30 Hz to 16 000 Hz (Normal tape)

Signal-to-Noise Ratio: 56 dB

Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W ⋅ H ⋅ D):

Installation Size (approx.):

182 mm ⋅ 52 mm ⋅ 150 mm

Panel Size (approx.):

188 mm ⋅ 58 mm ⋅ 11 mm Mass (approx.):

1.4 kg (excluding accessories)

Design and specifications are subject to change without notice.

ENGLISH

[MW Tuner]

Sensitivity: 20 ∝V

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 ∝V

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents KS-FX742R How to use the Mode button How to reset your unitContents Location of the Buttons Main display g RDS indicatorsControl panel Display windowTo turn off the power To drop the volume in a momentAdjust the sound as you want. See pages 20 Basic OperationsSetting the clock Listening to the radio Radio OperationsSearching a station automatically Auto search Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Tune in to a station you want while M manual is flashingP1 flashes for a few seconds Manual presetWhat you can do with RDS RDS OperationsTo use Network-Tracking Reception Press TP/PTY again. The TP indicator Disappears Using TA Standby ReceptionPress TP/PTY to activate TA Standby Reception To deactivate the TA Standby ReceptionSelect OFF in on the left column. PTY indicator disappears Using PTY Standby ReceptionIs stored into memory To deactivate the PTY Standby ReceptionTo store your favorite programme types Searching your favorite programmePress and hold TP/PTY for more To activate programme search, follow the procedure below Ex. When Rock M is selectedTo search your favorite programme type Than 2 seconds while listening to anAutomatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station PS NameSame programme can be received on different frequencies PTY codesListening to a cassette Tape OperationsTo stop play and eject the cassette To fast-forward and rewind a tapeOther convenient tape functions Finding the beginning of a tuneSkipping the blank portions on the tape During playbackProhibiting cassette ejection Playing the current tune repeatedlyWhile pressing Tape 23, press Hold 0 eject for more than 2 secondsAdjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustSelect the sound mode you want Storing your own sound adjustmentsFor Preset values SCM OFF Beat Soft POPBasic Procedure Changing the general settings PSMEx. When you select Level Other Main Functions24H/12H Preferred Setting Mode PSM itemsTo select the level meter-LEVEL To set the changer display-CH DispTo select the telephone muting-TEL To select the external component to useDetaching the control panel ConnectorsAttaching the control panel CD Changer Operations MP3 indicator lights up Disc number Current folder numberPlaying discs Select the CD changer CD-CHTo go to a particular disc directly To fast-forward or reverse the track/fileTo go to the next or previous tracks/files To skip to the next or previous folder only for MP3 discsDisc RND MAG RND CanceledTRK RPT Disc RPT Select the external component Line External Component OperationsDAB Tuner Operations What is DAB system?DAB FM/AM Select a service you want to listen to To restore the FM/AM tunerService name Ensemble name To tune in to a particular ensemble without searchingSelect the DAB band DAB1, DAB2, or DAB3 you want Storing DAB services in memoryTuning in to a preset DAB service Symptoms Causes Remedies TroubleshootingStored in memory are erased TapeChanger To clean the head MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on playFM Tuner SpecificationsMW Tuner LW TunerHaving Trouble with operation? Vor dem Einbau Drücken Sie Before mounting PressVoordat u aan de montage van het apparaat Fuse blowsBe sure to ground this unit to the car’s chassis HinweisSicherstellen, daß das Gerät am Fahrwerk geerdet wird RemarqueRear ground terminal Hintere Erdungscanschlußklemme Line out see diagram Schutz kappen Signalausgang sieheFuse position Not included with this unitKS-FX742R JVC Amplifier

GET0114-001A specifications

The JVC GET0114-001A is a cutting-edge device designed to elevate your audio-visual experience with its impressive array of features, technologies, and characteristics. This device exemplifies JVC's commitment to quality and innovation, catering to both casual listeners and audio enthusiasts alike.

At its core, the GET0114-001A boasts high-definition audio capabilities, delivering crystal-clear sound reproduction that makes every listening experience immersive. Its advanced digital-to-analog converter ensures that music, movies, and games are rendered with exceptional clarity, allowing users to hear details that might otherwise be missed. Coupled with a wide frequency response, this device brings depth and richness to various genres of music, enhancing the auditory experience significantly.

One of the standout features of the GET0114-001A is its compatibility with numerous audio formats, including lossless formats, which preserve the integrity of the sound wave. This versatility makes it suitable for a variety of use cases, from streaming high-fidelity tracks to playing back classic vinyl records. Furthermore, the device supports Bluetooth connectivity, enabling wireless streaming from smartphones, tablets, and other compatible devices, providing users with the freedom to explore their music libraries without the constraints of wired connections.

In terms of design, the JVC GET0114-001A features a sleek and modern aesthetic, easily fitting into any home entertainment setup. Its intuitive interface allows for seamless navigation, making it user-friendly for individuals of all skill levels. Additionally, the device is equipped with customizable equalization settings, enabling users to fine-tune their audio preferences to suit their unique listening environments.

Another characteristic that sets the GET0114-001A apart is its energy efficiency. Designed with sustainability in mind, it operates on low power consumption without compromising on performance. This eco-friendly approach aligns with contemporary consumer demands for energy-efficient electronics.

Overall, the JVC GET0114-001A stands out as a versatile and high-performing audio device. With its state-of-the-art sound technology, compatibility with multiple audio formats, and user-friendly design, it is a worthy investment for anyone looking to enhance their audio-visual experience. Whether you're a casual listener or a dedicated audiophile, the GET0114-001A is sure to meet and exceed your expectations, making it a valuable addition to any setup.
Top Page Image Contents