TAPE OPERATIONS
ENGLISH
Listening to a cassette
You can play back type I (normal) tapes.
1 Insert a cassette into the cassette compartment.
The unit turns on and tape
play starts automatically.
Note on
When a cassette is already in the cassette compartment, pressing TAPE 23 turns on the unit and starts tape play automatically. However, it is not recommanded to leave the cassette in the compartment when turning off the power. It may damage the tape head and the cassette.
2 Select the tape direction.
Each time you press
TAPE 23, the tape direction alternates between forward
( | ) and reverse |
( | ). |
Tape direction
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one. If you change the source, tape play also stops (without ejecting the cassette this time).
•You can also eject the cassette by pressing 0 while the unit is turned off.
To fast-forward and rewind a tape
Press and hold 
¢ for more than one second to
When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side.
Press and hold 4 
for more than one second to rewind the tape.
When the tape reaches its end, playback of the same side starts.
To stop fast forward and rewind at any position on the tape, press TAPE 23.
Tape play starts from that position on the tape.
Notes:
•When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
•When the tape reaches its end while
10