RADIO OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual searching to tune in to a particular
station.
Searching for a station automatically: Auto search
1 Select the band (FM1 – 3, AM).
FM1 
FM2 
FM3 
AM
Selected band appears.
Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Note:
To stop searching before a station is
received, press the same button you have
pressed for searching.
Searching for a station manually: Manual search
1 Select the band (FM1 – 3, AM).
FM1 
FM2 
FM3 
AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold 
¢or 4
until “M” (manual) starts flashing on the display.
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Start searching a station.
To search for stations of higher frequencies
To search for stations of lower frequencies
When a station is received, searching stops.
CONTINUED ON THE NEXT PAGE
7