|
| Selecting preset sound modes | |
ENGLISH | |||
| You can select a preset sound adjustment | ||
|
| ||
|
| suitable to the music genre. | |
|
| Select the sound mode you want. | |
|
Each time you press the button, the sound mode changes as follows:
| SCM OFF |
| BEAT |
| SOFT |
| POP |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
Ex.: When you select “BEAT”
Indication | For: | Preset values | ||
|
| BAS | TRE | LOUD |
|
|
|
|
|
SCM OFF | (Flat sound) | 00 | 00 | OFF |
|
|
|
|
|
BEAT | Rock or | +02 | 00 | ON |
| disco music |
|
|
|
|
|
|
|
|
SOFT | Quiet | +01 | OFF | |
| background |
|
|
|
| music |
|
|
|
|
|
|
|
|
POP | Light music | +04 | +01 | OFF |
|
|
|
|
|
Notes:
•You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” below.
•To adjust the bass and treble reinforcement levels or to turn on/off the loudness function, see page 13.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
• See left column for details.
2 To adjust the bass or treble level
1Select “BAS” (bass) or “TRE” (treble).
2Adjust the level.
To turn on or off the loudness function
• See page 13 for details.
3 Repeat step 2 to adjust the other items.
4 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for
the selected sound mode is stored in memory.
5 Repeat the same procedure to store other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values listed in the table on the left column.
14