ENGLISH
3 Tune in to a station you want while “M” (manual) is flashing.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM) until you release the button.
When an FM stereo broadcast is hard to receive:
1 Press M (MODE) to enter the functions mode while listening to an FM stereo broadcast.
2 Press MO (monaural), while still in the functions mode, so that the MO indicator lights up on the display.
Each time you press the button, the MO indicator lights up and goes off alternately.
MO (monaural) indicator
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
Each time you press the button, the band changes as
follows:
FM1 
FM2 
FM3 
AM
2 Press and hold both buttons for more than 2 seconds.
“-
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number
When automatic preset is over, the station stored in number button 1 will be automatically tuned in.
10