Playing an MP3 disc
Insert an MP3 disc into the loading slot.
The unit turns on, draws the MP3 disc and starts playback automatically.
The
To stop play and eject the disc
Press 0.
Playback stops and the disc automatically ejects from the loading slot.
To change the display information
While playing back an MP3 file, you can change the disc information shown on the display. Each time you press DISP (display), the display changes to show the following:
ENGLISH
The
MP3 indicator lights up.
Total folder number Total file number
Ex.: When the disc contains 19 folders and 144 MP3 files
All files will be played repeatedly until you stop playback.
Notes:
•When a disc is already in the loading slot, pressing CD turns on the unit and starts playback automatically.
•MP3 discs require a longer readout time.
•When playback starts, disc information will automatically appear. (See also the next column.)
•If you change the source or turn the power off, disc playback stops (without ejecting the disc).
Next time you select “CD” as the source, disc play starts from the beginning of the file which was playing previously.
To stop playback temporarily
Press 6.
Playback pauses and “PAUSE” flashes on the display.
To resume playback, press 6 again.
Folder name
File name
Elapsed playing time and
Current file number
Clock and
Current file number
Note:
The display shows up to 8 characters at a time and scrolls if there are more than 8 characters.
See also “To select the scroll
To check the information of an MP3 disc on the monitor
Turn on the monitor while playing back an MP3 disc.
The information appears automatically as follows:
Current folder name
Current file
•This unit can show a maximum of 239 files.
19