JVC LVT1373-001A, KD-SHX855 manual DSP modes, Setting items, Select your listening seat position

ENGLISH		To make further precise settings for
		the DSP modes
	Setting items:

The number of the built-in speakers:

Select the number of the speakers built in your car—“2ch” or “4ch.”

Time alignment:

Set the distance between each speaker and the listening seat position.

1Repeat steps ~ to ! on page 21 to select DSP mode.

2Select the number of the built-in speakers.

•For “Defeat” and “V.Cancel,” the speaker number is fixed to “4ch.”

4ch: Select for the four speaker system.

2ch: Select for the two speaker system.

3Select your listening seat position.

All: For all front and rear seats.

Front: For the both front seats.

R.Front: For the front right seat.

L.Front: For the front left seat.

4Select the speaker to be adjusted.

L.Front:	For left front speaker.
R.Front:	For right front speaker.
L.Rear*:	For left rear speaker.
R.Rear*:	For right rear speaker.

Subwoofer: For subwoofer.

*Appears only when “4ch” is selected in step 2.

5Select distance between the selected speaker and the seat.

•You can change the measuring unit to inch by holding DISP.

Each time you press and hold the button, the unit alternates between centimeter (cm) and inch.

• 0 cm to 400 cm

(0 inch to 160 inch) in 5 cm (2 inch) intervals

•Once you have set the distance, it is memorized for each seat position selected in step 3. The memorized setting are recalled next time you select the seat position.

6Repeat steps 4 and 5 to adjust the distance for the other speakers.

7Finish the procedure.

22