JVC LVT1373-001A, KD-SHX855 manual Specifications, Audio Amplifier Section Tuner Section

Page 52

ENGLISH

Specifications

	AUDIO AMPLIFIER SECTION			TUNER SECTION
	AUDIO AMPLIFIER SECTION			TUNER SECTION
Maximum Power Output:			Frequency Range:
	Front:	70 W per channel		FM: 87.5 MHz to 108.0 MHz
	Rear:	70 W per channel		AM: 531 kHz to 1 602 kHz
Continuous Power Output (RMS):
	Front:	35 W per channel into 4 Ω, 40 Hz	[FM Tuner]
		to 20 000 Hz at no more than 0.8%	Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
		total harmonic distortion.	50 dB Quieting Sensitivity:
	Rear:	35 W per channel into 4 Ω, 40 Hz		16.3 dBf (1.8 µV/75 Ω)
		to 20 000 Hz at no more than 0.8%	Alternate Channel Selectivity (400 kHz): 65 dB
		total harmonic distortion.	Frequency Response: 40 Hz to 15 000 Hz
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)			Stereo Separation: 35 dB
Equalizer Control Range:			Capture Ratio: 1.5 dB
	Frequencies:
	Graphic EQ:		[AM Tuner]
		63 Hz, 125 Hz, 250 Hz, 500 Hz,	Sensitivity: 20 µV
		1 kHz, 2 kHz, 4 kHz, 8 kHz,	Selectivity: 65 dB

12.5kHz (9 bands)

Parametric EQ:

3 bands (Band 1/2/3)

20 Hz, 25 Hz, 31.5 Hz, 40 Hz,

50 Hz, 63 Hz, 80 Hz, 100 Hz,

125 Hz, 160 Hz, 200 Hz, 250 Hz,

315 Hz, 400 Hz, 500 Hz, 630 Hz,

800 Hz, 1 kHz, 1.2 kHz, 1.6 kHz,

2 kHz, 2.5 kHz, 3.2 kHz, 4 kHz,

5 kHz, 6.3 kHz, 8 kHz, 10 kHz,

12.5kHz, 16 kHz, 20 kHz (31 frequencies)

Level: ±10 dB

Frequency Response: 40 Hz to 20 000 Hz

Line-In Level/Impedance:

LINE IN: 1.5 V/20 kΩ load

Line-Out Level/Impedance:

LINE OUT: 5.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Power Supply Unit: DC/DC converter

Other Terminals:

SUBWOOFER OUT

Changer control

52

Image 52

Contents Instructions How to reset your unit Important for Laser ProductsContents How to forcibly eject a disc How to read this manualFollowing marks are used to indicate How to change the display pattern How to enter the various menusEnter the selected menu Operate as instructed on the screenControl panel KD-SHX855 Parts identificationRemote controller RM-RK300 Installing the lithium coin batteryMain elements and features CR2025To turn off the power To drop the volume in a moment ATTGetting started Basic operationsCanceling the display Demonstration Setting the clockFinish the procedure Enter the PSM menu see Select OffWhen an FM stereo broadcast is hard to receive Radio operationsListening to the radio To tune in to a station manuallyEnter the Mode menu see Select LO/DX Select Local Enter the Mode menu see Select SSMStoring stations in memory Select the FM band FM1 FM3 You want to store intoManual presetting When using the remote controllerEnter the Mode menu see Select List Select a preset number Store the stationDisc/SD card operations Playing a disc in the receiverAbout MP3 and WMA discs To stop play and eject the discWhen the current disc is an MP3 disc When the current disc is an audio CD or a CD Text discPlaying discs in the CD changer About the CD changerPlaying an SD card About the SD card~ Detach the control panel To eject the SD card, press the SD card againAttach the control panel If an SD card has been loadedWhen Disc is selected Other main functionsSelecting a disc/folder/track on the list To select a discWhen Folder is selected When File is selectedTo start playback To select a file To start playbackTo cancel the prohibition Prohibiting disc ejectionSelecting the playback modes After making sure No Eject? is selected highlightedMode Plays at random Mode Plays repeatedlyMode Sound adjustments Daily use Adjust the effect level 1Selecting the DSP modes-DSP Available DSP modesSetting items Select the speaker to be adjustedDSP modes Select your listening seat positionMaking sound natural To activate BBE DigitalEnter the CCC menu see Select On Enter the BBE menu see Select the effect levelUsing equalizer-EQ ~ Enter the EQ menu see Select Graphic or ParametricGraphic EQ Selecting preset sound modesAvailable sound modes Storing your own sound modes Follow steps ~ to ! onBetween 20 Hz 20 kHz Select the band width Q- 0.7/1/2/3/4/5Sound adjustments Preference settings To cancel CrossoverAdjustable items for crossover network Activating crossover networkAdjust the selected setting item ⁄ Finish the procedureTo adjust fader and balance -Fad/Bal To adjust reproduced frequency level-CrossoverTo adjust subwoofer output- Subwoofer To adjust the input level of each source-VolAdjustTo adjust subwoofer level Hz to 200 HzBasic procedure Graphic displaysSelect the picture size-Large or Small @ Select the itemDownloading the ﬁles Downloading pictures or animationsDeleting the ﬁles Deleting the stored pictures and animationsDownload the file To delete the stored pictures Repeat steps 3 and 4 to delete more picturesTo delete all the stored files To delete all the stored picturesTo delete the stored animation Activating the downloaded files General settings PSM Basic procedureAdjust the setting Indications Selectable settings, referenceClock Hr Clock Min24H/12H ScrollIndications Selectable settings, reference Selecting the dimmer mode Select a settingEnter the PSM menu see Select DimmerSelect the source Finish the procedure Other main functionsTo erase the entire title SourcesDetaching the control panel Changing the control panel angleExternal component operations Playing an external componentMaintenance More about this receiver Playing a CD-R or CD-RW Playing an MP3/WMA trackSound adjustments Preference settings Changing the sourceImageLink Ejecting a discDownloading or deleting files General settings PSMOther main functions Assigning titles to the sources Troubleshooting Symptoms Causes RemediesSymptoms Causes PICT-PSM Specifications Audio Amplifier Section Tuner SectionCD/SD Player Section Refer to page of How to reset your unit Having Trouble with operation?Installation/Connection Manual Parts list for installation and connectionWhen using the optional stay When installing the unit without using the sleeveTypical Connections / √‡ËÕ¡µËÕ·ªµ‘ Precautions on power supply and speaker connectionsUnit will be seriously damaged For ampliﬁer only JVC CD changerKS-U57 KS-U58Connecting subwoofer / √µËÕ´-«Ÿ‡øÕ√