Canceling the display
demonstration
If no operations are done for about 45 seconds, display demonstration starts.
[Initial:
1Enter the PSM menu (see page 5).
2Select “Off.”
•Make sure “Demo/Link” is shown on the display. If not, press 5 or ∞.
3Finish the procedure.
To activate the display demonstration
In step 2 above, select “Demo.” For more details, see page 37.
| Setting the clock | ENGLISH |
|
| |
|
|
|
1 | Enter the PSM menu (see page 5). |
|
2 | Set the hour, minute, and clock |
|
| system. |
|
1Select “Clock Hr” (hour), then adjust the hour.
2Select “Clock Min” (minute), then adjust the minute.
3Select “24H/12H,” then select “24H” or “12H.”
3Finish the procedure.
9