JVC KD-AR600, KD-SC500 manual To erase the input characters, Available characters

• See below for available characters.

Assigning names to the sources 3 Select a character.

You can assign names to station frequencies and CDs (both in this unit and in the CD changer only for KD-AR600).

After assigning a name, it will appear on the display when you select the source.

Sources	Maximum number of
	characters
Station frequencies	Up to 8 characters (up to
	30 station frequencies
	including both FM and AM)
CDs*	Up to 32 characters (up to

40discs)

* You cannot assign a name to a CD Text or an MP3/ WMA disc.

1Select a source you want to assign a name to.

4Move the cursor to the next

(or previous) character position.

5Repeat steps 3 and 4 until you finish entering the name.

6Finish the procedure while the last selected character is flashing.

ENGLISH

(For KD-AR600) (For KD-SC500)

When you select a source, the power automatically comes on.

2While pressing DISP (display), press and hold SEL (select) for more than 2 seconds.

Ex.: When you select CD as the source

To erase the input characters

To erase all the characters at a time, press and hold DISP (display) for more than 1 second as described in the procedure above.

Available characters

A	B	C	D	E	F	G	H	I	J
K	L	M	N	O	P	Q	R	S	T
U	V	W	X	Y	Z	0	1	2	3
4	5	6	7	8	9	–	/	<	>

space

Notes:

•When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)

•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit (only for KD-AR600).

29