ENGLISH
7 |
Canceling the display | 3 Select “DEMO OFF.” |
demonstration |
|
|
|
When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds.
• It is recommended to cancel the display demonstration before you use the unit for the first time.
To cancel the display demonstration, follow the procedure below:
1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 25 and 26.)
2Select “DEMO” if not shown on the display.
4Finish the setting.
To activate the display demonstration, repeat the same procedure and select “DEMO ON” in step 3.
8